Headlight Ring is shot, will a later year work?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 16, 2011
Threads
143
Messages
1,314
Location
San Diego, CA
The rings that holds the headlight adjuster screws on my 12/73 are trashed. I'm in the process of trying to find a replacement, since it looks like Toyota discontinued the part.

I see this on CityRacer's site, it says it's for a FJ60 which also used 7" headlights. Anyone know if these or later year landcruiser would work?

OEM Headlight Housing for Land Cruiser FJ60 - Set of 2
 
Have you tried Spector?

upload_2019-1-1_10-2-5.webp


upload_2019-1-1_10-12-55.webp




Also, check the classifieds for people parting out vehicles.

Cool Cruisers is another vendor that may have what you need.

It doesn't hurt to check supporting vendors.
 
Last edited:
Thanks, I had seen SOR's listing, but I didn't like the idea that I wouldn't know what I was getting from them until it got here. I have bought used stuff from them before and it was in ok shape. I replied to some ads on the classifieds and I sent City Racer a email asking if the FJ60 ones he sells would work on a 40. Hopefully something pans out
 
Post a pic of what you need I am sure I have one I will sell cheap.
 
Post a pic of what you need I am sure I have one I will sell cheap.

Thanks for the offer, I was able to find some buckets and retaining rings in a old box of FJ parts I had from my last cruiser today. The biggest thing I am tracking down now is the adjustment screws which I think are NLA. I am using some that I found in the Dorman "Help" section at Pepboys today. Not a great fix but it's working
 
@badsamaritan .

Go to cityracerllc.com and search on headlight. He has the plastic grommets. The OEM screws may still be available.

I'll check again, but last night the 40's were out of stock, and all he had was the ones for the 60's. I emailed him, so hopefully he has a ETA
 
I found some on megazip but it would have cost me about 50bucks for 4screws. @73FJ40 has offered to send me some he had on hand. Thanks guys for all your help.

@Racer65, do you think the 60series would work ( metal ring that the adjustment screws thread into)?
Megazip lists everything, but they won’t be able to supply discontinued items.
I doubt the 60 series part will work, but I haven’t tried it.

I may have a set of the round inserts left over in the warehouse, but I’m leaving for a trip. Please pm me next Tuesday if you still need it.
 
When I first got into my restoration, I used to get all excited finding discontinued parts online, only to get an email a few days later saying that the part was NLA. The best you can do sometimes is find good used stuff.

If someone has one they want to send me, I can try to scan it and print it. No promises, but it will be free.
 
When I first got into my restoration, I used to get all excited finding discontinued parts online, only to get an email a few days later saying that the part was NLA. The best you can do sometimes is find good used stuff.

If someone has one they want to send me, I can try to scan it and print it. No promises, but it will be free.

I will see what I can find, if I find one that is useable I'll get it to you
 
Back
Top Bottom