For Sale FS: Door Handle Plunger Gasket Replacements

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.
Here is am image of the design. I think we could leave it as-is just fine, or I could ask him to make both sides symmetrical. The symmetrical approach looks like it would match the original piece. I'll ask him to make the change and then order up the sets.

Anyone else?

View attachment 939873

Last Call!
 
I've had some updates from my printer, and he has redesigned as I think they are supposed to be - symmetrical:

Door Handle Plunger Gasket Rev.webp
 
Last edited:
Updated List:

1) Lil John - 4
2) Scrap Daddy - 2
3) 71 Green Pig - 1
4) ABQ Cruiser - 2
5) Tucker - 2
6) One Man Army - 1
7) Scotterg - 2
8) Uncle Ed - 2

New Total = 17 sets.

Do your door handle plungers "stick" in the depressed position?

Or are they slow to return?

If yes, that sure makes it a pain to look your front doors!

After I made the glove box door handle reproductions: https://forum.ih8mud.com/threads/glovebox-handles-any-interest.806786/ xtiaan2000 asked me if I could make up some of these gaskets that seal the door handle plunger from dust and grime. The answer is "Yes!"

I made one for a test fit and it worked well. Then I made xtiaan2000 a set of of 4 and he gave a favorable report after installing.

So now I am assessing if there is any interest in making a batch of these? I will probably make 2 sets for myself, so I can rebuild my handles, but if others would like a set, I will take one order and then print the corresponding quantity.

If you have no idea what I am talking about - see below!

Price for a set of QTY 4: $10.50 + the ride (USPS Priority envelope = $5.60 in the US) = $16.10 w/ shipping. This is printed in nylon.

Now if you don't know what I am talking about, or have never taken your door handles apart (because this is not your idea of a good time!), take a look at these pictures.

Once you get the door handles off your Pig, pull the remaining rubber that mounts between your door handle and the Pig body off to reveal 2 screws that hold the plunger into the handle body.

Don't lose the little star washers that mount under the small Phillips head screws!

One the screws are out, you can work the plunger out of the handle body. Chances are that your gasket that goes around the plunger is cracked and incomplete. If this is the case, you will get dust inside the plunger and it will stick to the lube on the plunger shaft. Clean all the "schmutz" off the plunger shaft and lube it with some PB Blaster or Aero Kroil, slide this new gasket onto your door handle plunger and then reassemble.

Your door handles will now operate like butter!

View attachment 933543 View attachment 933544 View attachment 933545 View attachment 933546

These are dropping in the mail to me today, so I should get them Tuesday.

I'll start taking payments now.

Pricing below (includes shipping):
1 set = $16.10
2 sets = $26.60
4 sets (Lil John) = $42 (I'll cover shipping)

If you want to paypal me: tjscholand@comcast.net
Or you can send me a check.

Please send me a PM when you have sent payment telling me the following: your real name (for paypal tracking and addressing), your shipping address (sent via Priority USPS), & how many sets you ordered. If you are wanting to send me a check I will send you my mailing address.

Thank you all!
 
Last edited:
4 sets (Lil John) = $42 (I'll cover shipping)

If you want to paypal me: tjscholand@comast.net
Or you can send me a check.

Please send me a PM when you have sent payment telling me the following: your real name (for paypal tracking and addressing), your shipping address (sent via Priority USPS), & how many sets you ordered. If you are wanting to send me a check I will send you my mailing address.

Thank you all!

Would you prefer paypal or is a check better for you?

And can we use an alias instead? Witness protection here;) Old Hermit in Placerville:p

Thank you again for driving this.
 
Would you prefer paypal or is a check better for you?

And can we use an alias instead? Witness protection here;) Old Hermit in Placerville:p

Thank you again for driving this.

You are welcome, but don't thank me yet, I'll post an update below...
 
All, these were not in last night's mail, so something is wrong. I would have expected them in Tuesday's mail for sure. My printer is checking to see if the shipment was returned to him for some reason.

I will keep you all posted. :-(
 
Pablo,

Will you check and make sure you got paid from me, through paypal. I sent it to the mistaken address. :hmm:

I can. I have not been looking at the $ since the product is missing in the USPS somewhere. :-( I have been talking with the printer, the shipment was not returned to him, so at this point I am concerned that the shipment is genuinely lost.

I will check for your payment and PM you back.

As soon as I have an action plan for replacing this lost shipment, and a revised timeline I will post.

Sorry for the delay y'all.
 
Updated List:

1) Lil John - 4
2) Scrap Daddy - 2
3) 71 Green Pig - 1
4) ABQ Cruiser - 2
5) Tucker - 2
6) One Man Army - 1
7) Scotterg - 2
8) Uncle Ed - 2

New Total = 16 sets.

I have payments in my PayPal (tjscholand@comcast.net) from the following:

abqcruiser for 2 sets
Uncle Ed for 2 sets
Tucker for 2 sets
Lil John for 4 sets

I got PMs from scrapdaddy and 71 Green Pig saying they were sending payments, but I have nothing from you. Hoping PayPal detected the invalid email address and did not send your $? Sorry for the typo in my email address.
 
I have payments in my PayPal (tjscholand@comcast.net) from the following:

abqcruiser for 2 sets
Uncle Ed for 2 sets
Tucker for 2 sets
Lil John for 4 sets

I got PMs from scrapdaddy and 71 Green Pig saying they were sending payments, but I have nothing from you. Hoping PayPal detected the invalid email address and did not send your $? Sorry for the typo in my email address.

I now see payments from:
Scrap Daddy - 2 sets
71 Green Pig - 1 set
Scotterg - 2 sets

The problem is that I am not seeing any inventory yet!
 
Status
Not open for further replies.
Back
Top Bottom