I have two other 15x8 to go with Carp's if you want them. I wouldnt trust that tire either.
For Sale / Wanted To Buy
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
anyone in South Carolina hauling (or about to haul) a 60 series off to the junkyard?
please email me
rusty.phillips@amec.com
please email me
rusty.phillips@amec.com
ClemsonCruiser
Supporting Vendor
- Thread starter
- #1,624
Jim I am interested.... are they grey or black ?
If JP passes I might have a guy in Columbia that would want me to bring them back.
Jeremy
Jeremy
Coming over for a visit if you all do not mind.
Still got this thing for sale ? Was just in a bad accident with my 60 and need a bunch of stuff, namely a frame. Got a posting on the NC page if anyone wants to see what happened.
74 FJ40 For Sale
Don't necessarily have to sell, but sad to see it not being used and improved as much as I know someone in the local group may have the time and resources to do. Hopefully someone local will be able to enjoy and add to her. No other local postings besides here. Please let me know if you're interested. 74 black - AMC 360 engine, BFG AT 32x11.5s, tranny rebuilt by PO, good body, soft doors, bikini top, helluva push bar, no power steering, drum brakes...PM me if you're interested and I'll send pics or set up time to show. It's been at a few local events and you may see it cruising the streets of Simpsonville most weekends. Thinking $4500. Have a good one!
Don't necessarily have to sell, but sad to see it not being used and improved as much as I know someone in the local group may have the time and resources to do. Hopefully someone local will be able to enjoy and add to her. No other local postings besides here. Please let me know if you're interested. 74 black - AMC 360 engine, BFG AT 32x11.5s, tranny rebuilt by PO, good body, soft doors, bikini top, helluva push bar, no power steering, drum brakes...PM me if you're interested and I'll send pics or set up time to show. It's been at a few local events and you may see it cruising the streets of Simpsonville most weekends. Thinking $4500. Have a good one!
Coming over for a visit if you all do not mind.
Still got this thing for sale ? Was just in a bad accident with my 60 and need a bunch of stuff, namely a frame. Got a posting on the NC page if anyone wants to see what happened.
Yep I still have it, email me your email address and I can send pictures of specific places for you...bob.c.adamson@gmail.com
I have another 60 about to be ready to sell, did a frame off, but it has some body rust...
dohcdelsol93
snoogans
does anyone by any chance have an old fairey OD unit laying around?
Looing for a cheap alternitive to an H55f for a while (farirey OD is 27% compared to the 16% of the H55F)
my uncle is a machinest and my dad has access to a very reputable local machine shop so long as i have one that will fit a later model fj60 i can have any needed parts both made and made stronger.
Might be a fun toy now that i have several vehicles to drive and the 60 doesn't have to be my DD if i have issues/need to build parts
Looing for a cheap alternitive to an H55f for a while (farirey OD is 27% compared to the 16% of the H55F)
my uncle is a machinest and my dad has access to a very reputable local machine shop so long as i have one that will fit a later model fj60 i can have any needed parts both made and made stronger.
Might be a fun toy now that i have several vehicles to drive and the 60 doesn't have to be my DD if i have issues/need to build parts
Bajarack dual jerry can mount
I need to sell or trade a dual can mount that I bought thinking I could mount in the 40 but didn't realize it is too big. I tried to cancel it, but they already shipped it out. Should be here this week. Does anyone have a single mount that they want to trade for this dual?
Or I will sell it for $95.
BajaRack Fuel Can Holer - Sierra Expeditions
Jeremy
I need to sell or trade a dual can mount that I bought thinking I could mount in the 40 but didn't realize it is too big. I tried to cancel it, but they already shipped it out. Should be here this week. Does anyone have a single mount that they want to trade for this dual?
Or I will sell it for $95.
BajaRack Fuel Can Holer - Sierra Expeditions
Jeremy
dohcdelsol93
snoogans
if i had a roof rack i'd be all over that...very nice looking holder
I am really in need of the front clip / frame and all the stuff by the radiator. Not too sure if you looked at the link in my sig by my nice 60 is not so nice right now. I am not worried at all about rust in the nornal places because i really have no need from the firewall back.
Sending you an email shortly.
Thanks all for letting me come by.
I have the 3rd Row Seats from my LX470 (100 series) that I wont ever need. They are in OUTSTANDING condition and currently wrapped in plastic bags and sitting on top shelf in my garage. If anyone needs them just give me a yell by email or PM and make an offer. They are beige leather.
dohcdelsol93
snoogans
after the H55F deal fell apart i had to scratch my plans and go a different route....expensive for me but hopefully good for someone else
I have NEW
AA SBC to LC 4 speed adapter bellhousing
Centerforce clutch and pressure plate all new
pilot bearing new
throw out beaing new and pressed onto LC spacer
the longer older version fj60 clutch fork that must be used with the AA bellhousing
the AA dust guard new
I have over 600 bucks invested in this stuff...make me an offer.
I'm willing to do partial trades for used pre 86 SBC bellhousing, new 77 corvette clutch/pressure plate/throw out bearing/pilot bearing.
also willing to to trade plus a bit of cash for other items i need
Ranger OD unit (purchase pending)
Extended U bolts for front/rear of my cruiser
Castor shims for 2" shackle lift with pins
pretty much any power steering pump resevrior with mount bracket
extended brake cables for fj60
I have NEW
AA SBC to LC 4 speed adapter bellhousing
Centerforce clutch and pressure plate all new
pilot bearing new
throw out beaing new and pressed onto LC spacer
the longer older version fj60 clutch fork that must be used with the AA bellhousing
the AA dust guard new
I have over 600 bucks invested in this stuff...make me an offer.
I'm willing to do partial trades for used pre 86 SBC bellhousing, new 77 corvette clutch/pressure plate/throw out bearing/pilot bearing.
also willing to to trade plus a bit of cash for other items i need
Ranger OD unit (purchase pending)
Extended U bolts for front/rear of my cruiser
Castor shims for 2" shackle lift with pins
pretty much any power steering pump resevrior with mount bracket
extended brake cables for fj60
WTB Doughnut type spare tire. Chevy 5 Lug
Its for my project car, space is limited so I need the uber nasty low speed thing that looks like you will die if you put it on the car. I figured I'd see if anyone has one lying around before I head to the pick n pull.
-Lenny
Its for my project car, space is limited so I need the uber nasty low speed thing that looks like you will die if you put it on the car. I figured I'd see if anyone has one lying around before I head to the pick n pull.
-Lenny
I have one laying around. It is a 5-lug pattern but it is off a Jeep. May be the same pattern as chevy. Although I am in Florida, I will be at my place in Sunset, SC the first weekend in October for the MIAMI/Clemson game and can bring it up. I think a 12 pack of Corona can buy this thing if it will work for you.
dohcdelsol93
snoogans
find out the dimensions
my dad has a ton of pontiac fieors (5 lug GM) but these 5 lug patterns are differnt than that of camero/fierbird.
my dad has a ton of pontiac fieors (5 lug GM) but these 5 lug patterns are differnt than that of camero/fierbird.
