FJ60 side view mirrors

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 20, 2006
Threads
246
Messages
9,518
Location
AL, USA
I'm tired of not being able to see &#*$%^ out of my side veiw mirrors on my FJ60.


Anyone have some good options?

I assume you could swap the 62 mirrors but not sure they come in any color beyond chrome (not wanting that) or I guess I could buy the so called aussie mirrors...?

Not wanting to drill any new holes or install any new mounts..etc.
 
Last edited:
Elbert said:
I'm tired of not being able to see &#*$%^ out of my side veiw mirrors on my FJ60.

Anyone have some good options?

I assume you could swap the 62 mirrors but not sure they come in any color beyond chrome (not wanting that) or I guess I could buy the so called aussie mirrors...?

Not wanting to drill any new holes or intall any new mounts..etc.

I got a set of FJ62 mirrors with a nice flat black housing from Scott at Cruiser Corps. Good guys, good service, reasonable prices, and direct fit.

HTH.

:cheers:
 
I got a set of FJ62 mirrors with a nice flat black housing from Scott at Cruiser Corps. Good guys, good service, reasonable prices, and direct fit.

HTH.

:cheers:

Ok thanks for the tip...I've not heard of them before...but I'm sure that's the case on many thinigs.

Web site shows out of stock on the black versions..I'll send them an email.

Assume you are talking about these... http://www.cruisercorps.com/store/body/mirror-set-blacksatin-81980-11990

I know I've seen some guys post up about the taiwan versions of the "aussie" style or whatever they are called.... being of poor quality.

Seems like a set of flat black FJ62 style mirrors would be a good solution. Hard to tell what's in teh picture (or at least hard for me to tell) on the cruiser corp web site..as to what style they are.
 
CCOT has some: Mirrors - FJ60 FJ62 . I have used these on my Bj60 with satisfactory results. Not the greatest quality but they fit and you can see and I think they look good. The negative is the mirror needs to be sealed if you suffer through winter and road salt etc. The mirror backing came off of one unit.
 
No the knock off "Aussie" mirrors are not the highest quality but I wheel my rig alot and I would rather replace a knock off at 1/3 the price. You can buy OEM aussie mirrors but they are expensive.

I like the convex faces because I can see more of my rig when I am wheeling in the trees and rocks.. Tipped down a bit and I can see the passenger side tire.

Once you put them on you don't notice the quality anyway only the improved vision of your mirrors

Tony
 
I'm running the OEM Aussie mirrors, and I love them. Yes, they're expensive, and yes, they're nice and tight and don't vibrate or lose position at speed. I've never run anything other than the original small ones and these, so I have nothing to compare them with. I'll just repeat that I'm happy with what I have. I look forward to hearing your report of what you end up with.
 
Mine had the cheap knockoffs on it but they were brutal. Huge pain in the ass to fold and the ps side mirror eventually ended up on the side of the trail from a tree branch hit.

I ended up using a set of 78 series oem mirrors that from a place that outfits cruisers for the mines (Mobile Equipment). My buddy bought them for a project and ended up using something else so I got em for free. I had to make a little wedge shaped spacer out of uhmv plastic to make them fit level but otherwise the holes all line up.

Awesome quality.

D
 
Ok thanks for the tip...I've not heard of them before...but I'm sure that's the case on many thinigs.

Web site shows out of stock on the black versions..I'll send them an email.

Assume you are talking about these... FJ60 Mirror Set - Black/Satin - 8/1980 - 1/1990

I know I've seen some guys post up about the taiwan versions of the "aussie" style or whatever they are called.... being of poor quality.

Seems like a set of flat black FJ62 style mirrors would be a good solution. Hard to tell what's in teh picture (or at least hard for me to tell) on the cruiser corp web site..as to what style they are.

Yup. Those are the ones.

I've installed them on my 60 but my 60 hasn't moved in 8 months, so I don't know how they handle in terms of bumps, stability etc. I'll be happy to report in a couple of weeks when the rig is up and running.

:cheers:
 
I got a set of the cheaper knockoffs of the Aus mirrors. You won't have to drill new holes. I had to use electrical tape to hold the plastic caps on as soon as they were on the truck. I wouldn't even drive out of the garage without that.
Sure, they're less expensive, but I wish I'd spent the money on originals. The driver mirror rattles in the housing. 166-AUS-A-big cheaper knockoffs.webpThey're cheaper cause they're cheap. I really like the style and the convex gives a great view, just wish I'd spent the money on the higher quality ones.
166-AUS-A-big cheaper knockoffs.webp
 
So where can you buy the Aussie mirrors?! I would rather spend more up front for a good set that will last than a cheap set that will constantly vibrate, move, and may come off at some point.
 
I got a set of the cheaper knockoffs of the Aus mirrors. You won't have to drill new holes. I had to use electrical tape to hold the plastic caps on as soon as they were on the truck. I wouldn't even drive out of the garage without that.
Sure, they're less expensive, but I wish I'd spent the money on originals. The driver mirror rattles in the housing. View attachment 593541They're cheaper cause they're cheap. I really like the style and the convex gives a great view, just wish I'd spent the money on the higher quality ones.

I had a set of these and they were complete junk. I'd rather spend $5 on a hand mirror and hold it out the window than use these again.
 
I had some FJ62 fakes. They were chrome. I've seen some you can buy in black. Anyways those things vibrated and the chrome would never get clean. I put on my stock mirrors and I have not regretted it. So much crisper and clean. Plus it looks like a 60 again :D
 
Plus it looks like a 60 again :D
My Canadian 87 HJ60 came with the same FJ62 mirrors... So its not only a 62 thing ;).

I've replace mine with some used as they were shaking like hell and the arm was broken. Could not see nothing on theses mirrors.
 
Biche said:
My Canadian 87 HJ60 came with the same FJ62 mirrors... So its not only a 62 thing ;).

Round headlights = small mirrors

Square headlights = big mirrors

:D

The proportions of a 62 are much more vertically thought of. Taller front bumper. Taller, bigger mirrors. And all the features so you can drive with Starbucks in the other hand :flipoff2:

:D
 
i have some 62 look a likes and they were ok until i banged the DS on a tree... I ended up removing the spring part inside of it and drilled a hole in the top and ran a bolt with a lock nut on it so it would not come loose, only downfall with that is it will not fold in with out some effort... They were chrome when i got them and rattled canned them flat black and it has held up well... If you can stand to put a heep part on your cruiser the TJ mirrors are nice and i think they might come close to mounting in the same holes... I kinda like the TJ mirrors cause they have 2 pivot points... You should be able to find some of them in your local junk yard... :D

:cheers:
 
Round headlights = small mirrors

Square headlights = big mirrors

:D

The proportions of a 62 are much more vertically thought of. Taller front bumper. Taller, bigger mirrors. And all the features so you can drive with Starbucks in the other hand :flipoff2:

:D
In my 1987 CDN HJ60, you get a mix of everything:

24V system
60 dash setup
60 12V round headlight
62 mirrors
62 Transmission (A440F)
Rear sway bar
...

This is when I got it, you can see that both mirror are about to fall off:
nqvZr2
 
Back
Top Bottom