FJ60 side view mirrors

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Biche said:
In my 1987 CDN HJ60, you get a mix of everything:

24V system
60 dash setup
60 12V round headlight
62 mirrors
62 Transmission (A440F)
Rear sway bar
...

This is when I got it, you can see that both mirror are about to fall off:

Haha. I wasn't hating. You know I'd give my left peanut for a Toyota Diesel :D

The non electric 62 mirrors all kinda shake. The difference between stock and those are like HDTV and CRT
 
I came across, on Craigslist, a guy selling some H2 mirrors he was planning to use on his 60/62. He may have even posted them for sale in the classified section here on Mud.

I'm in the market for mirrors too. Has anyone used anything other than the 62 or Aussie-style mirrors? I know if you've got the money anything will fit, but has anyone used anything different - like from an H2 for example, that may fit with only minimal modificaitons?

sorry, not trying to highjack the thread just trying to add options...
 
I came across, on Craigslist, a guy selling some H2 mirrors he was planning to use on his 60/62. He may have even posted them for sale in the classified section here on Mud.

I'm in the market for mirrors too. Has anyone used anything other than the 62 or Aussie-style mirrors? I know if you've got the money anything will fit, but has anyone used anything different - like from an H2 for example, that may fit with only minimal modificaitons?

sorry, not trying to highjack the thread just trying to add options...

I hate to say it :D... TJ mirrors....
 
What additional pivots does a tj mirror offer, my aussie mirrors pivot in two directions now, they are not even right or left specific, just pivot it around for the opposite side, 62 mirrors pivot left right with the whole body and up down just with the mirror. No need for heep parts...

Tony
 
CCOT has some: Mirrors - FJ60 FJ62 . I have used these on my Bj60 with satisfactory results. Not the greatest quality but they fit and you can see and I think they look good. The negative is the mirror needs to be sealed if you suffer through winter and road salt etc. The mirror backing came off of one unit.

These might have been teh ones I saw on a picture I came across on teh internet. Showed a 60 sporting 62 style mirrors tha were black in color.

What's your take on quality of these?
 
So where can you buy the Aussie mirrors?! I would rather spend more up front for a good set that will last than a cheap set that will constantly vibrate, move, and may come off at some point.

yes... I'm leaning towards that decision as well.
 
SOR sells both types in knock offs and OEM. I sure other places as well.

My cheap aussie's don't vibrate or move. They can be tightened and a dab of silicone under the frame tightened up the mirror glass.

Tony
 
The "Aussie" mirrors are really Euro mirrors. The guys in AU have the same crappy one we got. A couple of weeks ago someone posted a Euro parts guy who had a mirrors (real ones ) for about $50.00 each. Shipping from Europe might be a deal breaker though.

LINK

Direct link to euro mirrors $40 euro
Dyno
 
Last edited:
What additional pivots does a tj mirror offer, my aussie mirrors pivot in two directions now, they are not even right or left specific, just pivot it around for the opposite side, 62 mirrors pivot left right with the whole body and up down just with the mirror. No need for heep parts...

Tony

My main thought was u might some on the cheap at a junk yard... I don't know if i can explain how they pivot... Here's a pic of a tj mirror with the door mount option, but you get the idea...

:cheers:
180.webp
 
Please tell me someone has used the tj mirrors. I'm for Toyota purity and all, but who am I kidding I'm leaning toward a 5.3. I hate the idea of anything but oem, but for me those mirrors are terrible. I think the tj mirrors look pretty good. Something to consider seeing as good aussie mirrors or 62 mirrors can be pretty pricy.
 
I have the Aussie side mirrors and like the fact that they have a little more vertical to them unlike the stock 60, but I don't like that they start rattling really bad after awhile.

If you have the knock offs, just pull the trim piece that holds the glass in, add a couple of dabs of silicone, put the frame back on and no more rattle...
 
If you guys really are that hard up for good mirrors call Mobile Equipment. They take them off the brand new 75/78 series cruisers and throw them in a bin...

Crappy 60 repro mirror beside the 78 series mirror

37s004-1.jpg



This is what they look like on a 60 with the spacer I mentioned in my first post.

mirrors007.jpg

mirrors006.jpg


D
 
Toyota makes fj62 non-electric mirrors. OEM quality, bolts onto a 60. I rattle canned mine black. CDan found 'em for me.
Sideview Jan 2012.webp
 
Last edited:
I got a set of the cheaper knockoffs of the Aus mirrors. You won't have to drill new holes. I had to use electrical tape to hold the plastic caps on as soon as they were on the truck. I wouldn't even drive out of the garage without that.
Sure, they're less expensive, but I wish I'd spent the money on originals. The driver mirror rattles in the housing. View attachment 593541They're cheaper cause they're cheap. I really like the style and the convex gives a great view, just wish I'd spent the money on the higher quality ones.

When I replaced my mirrors on a 62 I got these same knock-off aussies and I hate em tremendously. First, they don't mount quite right as they leave a gap at the top of the mount where the door curves in and the mirror mount stays flat. Second, I had to take them both apart and tighten them because the mirror housing would sag downward as I drove. Third, I can't see much out of them and I think it's because the mirror itself is a little too convex and made out of cheap plastic. I constantly have to adjust the driver mirror and focus really hard to see anything. It's like a mirror on a kids toy. My buddy has the real aussie mirrors and they are much better. I agree, spend a more and go for OEM stuff
 
Back
Top Bottom