fj40 transfer case rebuild

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 17, 2014
Threads
7
Messages
11
Location
bellingham
Just blew up my t-case in my fj40 with a 1992 GM 350. Any ideas or feed back is most welcome. I'm looking for the strongest cost effective fix. I wheel the fj and would like to only rebuild the case once.
What is the best, strongest option for me?
 
Just blew up my t-case

Please to define "blew up"...
Did it break in half? Have a hole in it?
3-speed, 4-speed or split-case transfer case?
If it only needs a rebuild (why do you think it does?), Kurt has the best prices on rebuild kits. Easy to do yourself with a FSM.
 
Best end solution (assuming sticking with the 1-piece case) is going to be the Orion from Advance Adapters. But plan on $1500-$2k all things considered. Best budget solution. Get a spare housing ($100 or less from a guy that just did an Orion), add a rebuild kit and your parts (assuming they are salvageable) and your back in business. This time, add a top T-Case saver and I'd recommend the front saver too. Both are available from Valley Hybrids and we stock his t-case savers as well.
 
Oh, so you now have a home-made split case...
Rebuild kit won't fix that.
 
Great, I actually have 3 older t-cases right now. I will attempt to reuse my fine spline shafts in one of the other t-case housing. Ill look for somebody to rebuild it. Also, ill look for the top and front saver parts.
Thanks for the feedback.
 
Georg at valley hybrids. Rebuilt mine, excellent work great customer service. Also does Orion's.


Call sign is Orangefj45

AGREE,
My Orion 4:7 case will be on its way there in a few. I’ve read many good things on H8MUDs forums and heard very good responses from guys at Advance Adapters.
 
Whoa.
photo.jpg


I wonder if one of these could have helped:

T5a0tY0.jpg


It appears the break is right at that spot.

6CXaiqH.jpg
 
Hugh, What Transmission is that?
Looks like that bracket would have helped.

[URL="http://i.imgur.com/6CXaiqH.jpg"][/URL]

Just was looking on GIS for a pic of the case saver installed. I thought it was built to protect against a break right in the area the op had one - though maybe not so bad of one!

Looks like your basic stock 4 speed tranny and xfer case to me.

Heifer-net
 
There's also a rear T/C casesaver...called the Pardi plate. I run 2 casesavers on mine, the top plate and rear plate.

It's been a minute since I have heard the 'Pardi-Plate' brought up. There is also the front nose-cone saver too, as I recall Warden started those?
 
Back
Top Bottom