Fj40 Center Diff rear axle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 26, 2019
Threads
2
Messages
3
Location
San Diego
I bought a Land Cruiser project that came with four extra axles. One of rears is a center diff and a little narrower then the other rear. Anyone know where this might have come from?
D8B0A3A0-2556-4C56-9A96-825D295C68A6.jpeg
 
Early to mid-'63 had centered rear axles. The V-shaped banjo brake fittings are interesting, however, I thought they were later than mid-'63.
 
I don’t recall the vins, but early 40s had a single speed tfer case and a centered rear axle.

Straight axle Mini truck rears were the same WMS as the 40.

If the center diff weldment is the same height as the later axles, it’s probably an early 40 rear.

FJ25’s had single speed transfers and centered diffs. 1961-mid 63 FJ40’s had hi/low transfers just like later 40’s but had centered diffs as well. FJ25 and early 40 centered diffs and brakes are very different from one another. These appear to be early 40 vintage (assuming they’re 9.5” diffs)
 
FJ25’s had single speed transfers and centered diffs. 1961-mid 63 FJ40’s had hi/low transfers just like later 40’s but had centered diffs as well. FJ25 and early 40 centered diffs and brakes are very different from one another. These appear to be early 40 vintage (assuming they’re 9.5” diffs)


Should add that while the 61 to mid 63 has a two speed transfer case the output was offset like the mid 63+ transfer cases but diff wasn't so driveshaft ran at a angle.
 
Like this
IMG_1918.webp
 
Back
Top Bottom