Fan through Rad....Twice

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 3, 2014
Threads
57
Messages
704
Location
Aspen
Radiators are not my friends. This will be my 5th RAD in 3 weeks. First one, a koyo internally blew, then i got a TYC and the 2 i got leaked. May I also just add I ran with a leaky TYC for a week and it cooled great and I had no issues. But a leaky RAD is unacceptable and I wasn't going to try another TYC. 3rd one i stepped up my game, and I got a CSF. Sick radiator built really well. Worked flawlessly for 12 hours until I am driving home from school and I see my temp moving up relatively fast. It climbed up to 208 and luckily I was able to kill it and roll it to my house. Late at night so i didn't mess with it to much. The next day I order a O'reilies cheapo raidaor and we tow my cruiser over to @Nay house so he can look at it to. I tear it all apart and we notice one of the fan blades cut half off and a gash in the very bottom of the radiator. We were hoping it was a torque issue I was hopping it was one of the nuts holding on the fan clutch as one was sorta loose, but still not very loose. We throw in the Cheapo O'Reily radaitor and long behold i rev it to 3k and BAM! It goes through the Radiator again. I have been very lucky with all these companies warranting and refunding there Raidators but this is ridiculous. Its obvious the motor is not moving forward or backward and the radiator isn't moving. So it is either water pump or fan clutch. This doesn't help but both aren't OEM. My bad and I know better now but when I did all this a year ago I didn't think twice. I did my water pump as PM and bought the one from Cruiser Corps and my Fan Clutch I replaced because even with swapping the fluid in the OEM it still didn't seem to do anything (no resistance). I did the fan clutch when I just bought the rig I totally forgot I did it until yesterday going through the garage and coming across the OEM one. I have a new fan coming but what else should I get? I need this fixed but can't burn down money down the toliot trying to find it. Already dropped $200 on coolant alone :bang:.

Thanks!
 
img_0550-jpg.375269
 
That is not good, are you sure the, rear tranny mount is not broken or a motor mount broken, what kind of slop does the water pump have, something is definitely moving the fan into the radiator
 
May I suggest OEM @ about $350? I would think that you're not installing properly as the fan blades should not contact unless the the bottom of the rad unless it isn't "indexed" properly. I remember tabs or something on the bottom of my OEM that had to fit properly and the trans cooling lines shouldn't be trapped behind the rad.
 
That is not good, are you sure the, rear tranny mount is not broken or a motor mount broken, what kind of slop does the water pump have, something is definitely moving the fan into the radiator

Defiantly not tranny or motor mounts. Rev up the motor from the cable in the engine bay and it does not move forward or back at all.
 
May I suggest OEM @ about $350? I would think that you're not installing properly as the fan blades should not contact unless the the bottom of the rad unless it isn't "indexed" properly. I remember tabs or something on the bottom of my OEM that had to fit properly and the trans cooling lines shouldn't be trapped behind the rad.


It is installed correctly and your right all the unharmed have no way to make contact with the Radiator except the broken one. The trans cooling lines definitely are tight back there behind the shroud however i believe there is no real pressing on the shroud itself.
 
And with the cruiser idling it defentialy is not 100% solid straight. But I am not sure if that is the water pump (feels tight from what I can do with my hand), fan clutch (once again can't really move), or just the fan being out of wack with one tweaked blade
 
It is installed correctly and your right all the unharmed have no way to make contact with the Radiator except the broken one. The trans cooling lines definitely are tight back there behind the shroud however i believe there is no real pressing on the shroud itself.

Trans lines should be in front of the shroud...there's a clip on the bottom DS of shroud. Like, closer to the engine and not closer to the grill. I made the mistake of trapping them behind and it pushes the rad forward.
 
I like the CSF radiator I have in mine, but no radiator will withstand being chopped up by the fan.

If everything is mounted properly, you should have ample clearance between the fan and radiator (I know you know that). I have nothing to offer but to double check everything.

You've had more than your share of bad radiator luck, for sure.
 
Let’s back track. The first fan to radiator contact you ever had was while running the CSF radiator?
 
Here's the trans line clip...not sure if this is the issue but may be of use.
20171220_192513.webp
 
Trans lines should be in front of the shroud...there's a clip on the bottom DS of shroud. Like, closer to the engine and not closer to the grill. I made the mistake of trapping them behind and it pushes the rad forward.

There is that clip on the back of the fan shroud that it is attached to. Is that what you are talking about?
 
The fan flexes forward as rpms increase but shouldn't contact the radiator. What fan clutch are you running? It may be locked up, the fan shouldn't run at the same speed as the water pump.

Crappy knock off Napa Fan Clutch. Don't believe it is locked up it does engage and disengage. Probably should replace regardless, I am sure it is a piece of crap. Just expensive to do so
 
I had some el cheapo brass radiator on before and once I moved up to 30k fan clutch fluid I would hear the tipp of the fan scrapping the radiator between 3-4000 rpm. Fortunately it was brass so didn’t break the radiator.
E31E4767-2887-4998-A83A-28D407DA8963.webp


Now I’m back down to 20k just in case since my radiator is now aluminum but it also sit out further.
 
Did ya back wards the fan? The tranny lines should be in the clip as shown in the pic


Don't believe so. Last time the fan was off was over a year ago and it would be crazy if just now it comes back to haunt me. I will look up some pics I don't believe it is though. And yes the tranny line with the clip is in that location. The other line is just hanging down there. Not in contact with anything though
 
Let's see pic of the clutch? You have been running it with no issue for awhile?
 
Back
Top Bottom