Factory hand throttle?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Here's the Australian hand throttle I just intalled:
I also got my hand throttle hooked up in the wee hours last night. It came off an Aussie rig. The cable bracket was not a 90 degree "L" like North American brackets I've seen pictures of. I didn't want to bend or risk weakening the OEM bracket so I built an adapter:hillbilly:. I need to improve my bracket but I was itching to go for a drive so I installed it and off I went. I am pleased with my score:)

View attachment 1405879

View attachment 1405880

View attachment 1405881

View attachment 1405882

View attachment 1405883
 
My 9/67 had the hand throttle in the dash. My 10/69 doesn't. US market had 3/69 to 9/69 two barrel carburator. If those had a hand throttle unsure of. So 3/69 or 9/69 was most likely the end of the hand throttle here.

My 9/69 had it on the dash, and originally had a single barrel carb. When I put a 72 tub on, I mounted it in the same place on the dash.

As for cruising, I will sometimes use it in low range 4wd on trails, but never on the road
 
I believe September '69 was the last of the in-dash cables for US market.

I use my hand throttle a lot. I have my idle speed screw turned way down for compression braking downhill, so my hand throttle is used for my running idle.

Also helps with morning warm ups. I disconnected the factory linkage on the carb that bumps the idle up with the choke. IMO too much climate variation for any one preset to handle properly.
 
I believe September '69 was the last of the in-dash cables for US market.

I use my hand throttle a lot. I have my idle speed screw turned way down for compression braking downhill, so my hand throttle is used for my running idle.

Also helps with morning warm ups. I disconnected the factory linkage on the carb that bumps the idle up with the choke. IMO too much climate variation for any one preset to handle properly.

I agree the hand throttle is useful. I've used the one on my 68 in subzero weather. I would put the transmission in gear and transfer case in neutral. Helped warm up gear oil that was thick making hard to shift. Choke alone runs too rich cold and would stall after a short while. With the throttle I was able to go back into the warm trailer while waiting for the vehicle to warm up. Wish I had a throttle in my 10/69 70 model.

What is your opinion on a 9/69 having a single barrel carburator? Thought the 3/69 to 9/69 had two barrel carburator with the stud to secure the air cleaner to the carburator. If a 9/69 had a single barrel carburator it should be listed in the parts system correct? Seen a few early large site glass two barrel carburators go for sale here. Also read we didn't get them because of the poor emissions. When the one barrel ended world wide I unsure of but thought we were one of the last to get one.
 
All the vehicles I have seen in the last 32 years from that time frame have all had the funky two barrel John.

That said, Mr. T has a carb gasket kit for a 3/69-9/69 1bbl, so it had to exist somewhere. @lc69hunter may have had the only one known to this forum. Then again, he always has to be a little different.
 
Bumping for current info. I've just gotten a '74 and want to install a hand throttle. If someone had a complete kit that would be awesome. If not, any advice would be appreciated. The more stock looking the better but am not a purist and this is not a restoration.

Thanks all!
 
How do they work in practice in 4 low when just slowly cruising along? Might be nice in some of the remote areas I go to sometimes.
 
Bumping for current info. I've just gotten a '74 and want to install a hand throttle. If someone had a complete kit that would be awesome. If not, any advice would be appreciated. The more stock looking the better but am not a purist and this is not a restoration.

Thanks all!
Thanks @4Cruisers.
I have complete kit minus the pedal if that helps. Our pedal is RHD anyways.
 
I got THROTTLE cable from @FJ40GURU, the pedal and brackets from @RAGINGMATT.
On my road trip from WA to AK we used the hand throttle at least for 1500miles. It has got to be the better upgrade that I have installed. Although in this shot it is not engaged, we used it a ton.
99FAABB2-8F1B-4A4D-868B-1D3D08C279C3.webp
 
Back
Top Bottom