Factory AC - worth saving?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

John in Utah

SILVER Star
Joined
Oct 20, 2017
Threads
32
Messages
692
Location
Moab
When I bought my cruiser the AC was mostly installed, but the lines were cut and the compressor capped off. I had never worked on an AC system at the time and promptly ripped it out for the added leg room. Now that I've done a complete AC overall on my 4Runner, I'm feeling more confident I could get the cruiser system up and running, but given the aftermarket options (vintage air) I have some questions on the practicality of the whole ordeal.. Pics for reference

_DSC0651.webp

_DSC0654.webp

_DSC0655.webp

_DSC0658.webp
_DSC0660.webp
 
IMG_1731.webp

IMG_1732.webp


Since the truck is Saudi born I don't have any reason to doubt the originality, and I imagine it's likely the 3B donor vehicle used had AC as well. I have no idea if the compressor works, but the controller and fan worked when I pulled them.

Could a good shop fix the broken tubing pictured on the condenser? I'm thinking getting some tubing made to plumb the condenser, compressor, and evaporator is easier than finding orignal pieces. Is there a dryer I'm missing? expansion valve?

Doing some research it seems like these parts, especially LHD ones, are pretty hard to come by? I'm far from a purist, so they may not be worth as much to me as to others. The real benefit I see to keeping it is mounting hardware and wiring are already in place.

Anyway ... opinions welcome! :meh:
 
Last edited:
Original equipment would be nice, perhaps replace the compressor with a new one.

If you decide not to go with original, I may be interested in buying it from you. :)
 
What did you end up deciding to do with the factory AC? I have most of the bits for a 3B install and trying to line up a few more ducks.
 
Forgot I ever made this thread - I kept it and reinstalled. The FJ controller requires some electronic trickery to work with the diesel. Are you looking for the duct that goes behind the blower unit? Might be able to modify a non-ac one...
 
I have the L200 duct. I’d be willing to offer it up for someone reputable to reproduce.

As for the wiring/electronics I’m aware of a way to modify a component from an FJ62 to make it work. I’ll try to find the thread and reference it here when I do.

Update: I believe the FJ62 AC amplifier is the part suited for AC in a diesel. I thought I saw something about modifying it to be more of a plug and play. Several factory AC threads keep popping up. Trying to read through them to find the information I’m referring to.
 
Last edited:
As for the wiring/electronics I’m aware of a way to modify a component from an FJ62 to make it work. I’ll try to find the thread and reference it here when I do.

Please do, would love to learn a more eloquent way to do it.
 
You will want to replace the condensor, dryer, hoses and pump.


Repaired many copper HVAC coils when I was still working. Tap the tube sheet in a little, reform the copper tubing then silver solder up. When aluminum tubing started becoming popular repairs were trickier. Little too much heat and aluminum just disappeared. Copper was always way easier.

Forgot I ever made this thread - I kept it and reinstalled. The FJ controller requires some electronic trickery to work with the diesel. Are you looking for the duct that goes behind the blower unit? Might be able to modify a non-ac one...

So you got the controller to work? Have a HJ47 controller in Australia but would have minded trading it for a petrol model.

Have a RHD heater duct from a A/C equipped HJ47 planned to see about reverse engineer to a LHD duct. Using this a non A/C LHD duct.
 
OE AC units are hard to find. I am guessing your rig is a ‘79-83? If it was mine I would get it running again. If you sell you most likely will have a long line of potential buyers.
 
Repaired many copper HVAC coils when I was still working. Tap the tube sheet in a little, reform the copper tubing then silver solder up. When aluminum tubing started becoming popular repairs were trickier. Little too much heat and aluminum just disappeared. Copper was always way easier.



So you got the controller to work? Have a HJ47 controller in Australia but would have minded trading it for a petrol model.

Have a RHD heater duct from a A/C equipped HJ47 planned to see about reverse engineer to a LHD duct. Using this a non A/C LHD duct.

Yes I remember we talked about a controller trade - I’m still good for that. I didn’t modify the controller, just bypassed it and put the compressor on a switch. So the controller still works the fan speed but that’s it.


OE AC units are hard to find. I am guessing your rig is a ‘79-83? If it was mine I would get it running again. If you sell you most likely will have a long line of potential buyers.

Yes I decided awhile ago to keep everything and make it work. I was young(er) and naive(er?) about the various Unobtainium I had stumbled into
 
Meant to follow up with the threads about using a FJ62 AC amplifiers for a 3B AC setup. I’m having a tough time sorting through all the general posts about AC. I know there’s a better thread but here’s what I found:

AC Amplifier in 3B converted FJ60

Here’s one of the other threads I was thinking about that references the AC amplifier compatibility:

Wanted - 3B A/C idler pulley
 
Last edited:
Meant to follow up with the threads about using a FJ62 AC amplifiers for a 3B AC setup. I’m having a tough time sorting through all the general posts about AC. I know there’s a better thread but here’s what I found:

AC Amplifier in 3B converted FJ60

I remember reading that one, you’re right though there’s another thread out there I just can’t find it right now, I think I went through my loom and drew up a wiring diagram for the 83... I’ll have to find that too.

The 62 amplifier doesn’t use a signal from the coil, so that’s what you would want for the diesel application. Problem is I wanted to use the 40 amplifier that mounts under the dash but I didn’t want to open it up and start swapping the guts with the 62 (fj40 amplifiers are still valuable to someone else) - easier to just bypass the compressor controls and eventually trade out my amp for a diesel one like @Living in the Past proposed.
 
Okay... found the one of the threads where @lostmarbles (RIP) posted some diagrams and one of them is the for a 79 BJ40. Linked here:


Here’s the thread about AC amplifiers:

The A/C Amp Thread
 
Last edited:
Okay... found the one of the threads where @lostmarbles (RIP) posted some diagrams and one of them is the for a 79 BJ40. Linked here:



Thought Tom was fine, it's only his BJ40 that was wrecked and gone. Hoping I'm not wrong . He was around for a while after the accident that wrecked his BJ40 and never a mention of injuries. That included a few PMs.
 
I thought I saw a post that mentioned he had passed... Hope I’m wrong. His posts are full of good info.
 
Last edited:
I thought I saw a post that mentioned he had passed... Hope I’m wrong. His posts are full of good info.

Hoping your wrong too. After his BJ40 got wrecked he stopped posting on mud less and less. For what ever reason he didn't seem interested in replacing it with another cruiser.


Quick checked shows he last visited Mud August 11th 2020. Last post was August 7th 2020. Thinking he just not on Mud much.
 
Last edited:
Back
Top Bottom