Cup Holders?

[bhicks]

Can we order the grey via Odd Iron or only black?

I decided to only make them in black. After doing some research I came across 6 different interior gray color codes for the 70 series over the years and I'm not even sure I found them all. There were just way too many color options to be able to offer them all so I had to go with black. There is at least some interior black trim in almost all 70s.

 

[cruiserdan]

Rustoleum brown Cammo paint is close to the factory brown. I had a local automotive paint shop custom mix an interior plastic paint spray pack for me. I look them a piece of the brown trim as a sample. They got damn close and it cost me about 18 bucks.

 

[Gun Runner 5]

The material should lend itself to painting quite easily.

 

[bhicks]

summer is approaching….
any chance to have a floor mounted LHD version released?

The current floor version will work on either RHD or LHD but I think a mirrored part will work a bit better for the LHD and still work well for the RHD. I will be creating a mirrored version and sending it over to Cdan for test fitting. I think the mirrored version will also work in both RHD and LHD but might actually work better for both. I am trying to avoid having too many options. I'm in the process of possibly using a plastic mold company to start making my parts and each mold is very costly. If I can limit my design options to two for the 70 series then I might to able to afford the investment.

 

[gkanai]

The material should lend itself to painting quite easily.

Good point. Will order the black soon.

 

[Gun Runner 5]

Good point. Will order the black soon.

It's a nice product, you won't be disappointed.

 

[bhicks]

So I am officially done selling the 70 series cup holders. I am now just a manufacturer of them. They are only available on the Odd Iron site and no longer on my site. Odd Iron also has them up on ebay now for international shipping. Here is the link:
STORE

 

[renago]

after making a center console , I felt I needed also a cup , or small bottle holder.
here is the result .
hope some one can get some inspiration.
the improvement I would do today , is to integrate the cup holder in the console .
the cup holder is detachable with only 2 screws 6ma .
very solid construction , 10mm marine grade wood .
lined with grey polyester microfibre .
top with nice full grain leather .
divided the box in 2 layers , the bottom one can hold a reflex with a good zoom or other rather big objects .

bye Renago

 

[Gun Runner 5]

 

[elkaholic]

Finally got mine installed. Sure is nice to have a place to put the 32 oz cup of coffee on my way into work (I commute 75 miles each way) ....

 

[gkanai]

Nice! Photos?

 

[elkaholic]

Nice! Photos?

This weekend, grasshopper. It'll make Charles and Rob happy ....

 

[ceebs87BJ]

Received mine today. I'm fairly happy with it, there are a few air bubbles and marks from the moulding. It will be nice to finally have cup holders!

 

[ALEXY]

Does the phone holder interfere with the handbrake lever use?

 

[bhicks]

Does the phone holder interfere with the handbrake lever use?

The ebrake lever should have plenty of room.

 

[mohawk]

i made some when i fitted 79series buckets too my 75

 

[Gun Runner 5]

Just a reminder, the 70 Series cup holders produced by "BH3D" are now available exclusively from Odd Iron Off Road in Thomasville, GA.
Painless process + free shipping through the website.

 

[bhicks]

So the latest batch of 70 series cup holders should have been delivered to Odd Iron Offroad some time earlier this week. This last batch was a much improved batch. I got the subtle details of the prints dialed in for a much smoother look. I'm very happy with this latest batch.

 

[Gun Runner 5]

www.oddironoffroad.com

 

[davegonz]

Have you guys seen this? I was looking for some storage solution for my poverty pack 80 (60/40 bench with no center console).

Goldfire Black ABS Armrest Storage Box Floor Center Console Tray Cup Holder Fit for Toyota Land Cruiser LC70 LC71 LC76 LC77 LC79 Amazon product ASIN B07YXYC2M3