cheapest source for wheel spacers?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

i know you dont want to ditch yo wheels, i didnt either then i did and i am happy i did, basic black wheel cheaper than spacers
.02$
 
isotel said:
good idea on new wheels.. never thought of it like that.. 2" BS instead of 3.5


exactly what i did. no need to worry about extra failures
 
sorry for the jack, but what is the deal with using ifs spindles for like 1.5" extra width? Pretty sure I ran across that somwhere but didn't really understand what was involved.

For my added input, marlin makes them for 100 a set or so and stand behind their product, my buddy received one that was .01" out and they overnighted a new one to him and took his back to evaluate what happened.
I would still say new wheels seem like a better route however, or better yet, fj60 axles :grinpimp:
 
74fj40 said:
Jc whitney has em for like 12 bucks


maybe 1/8th or 1/4th

i payed $125 for 4 1.5in spaces on ebay with shipping, lock tight is a must i think, its a PITA to keep the tight with out that stuff!
 
You can use IFS hubs on the front to gain width, Sky has a kit for it.

I'm going to do the IFS hubs on the front and possibly a 60 rear axle, but I'm wheeling in 2 weeks and don't have time for either.

Probably go with Marlin once I got the coin from sellin my old tires. Thanks.

bustanutley said:
sorry for the jack, but what is the deal with using ifs spindles for like 1.5" extra width? Pretty sure I ran across that somwhere but didn't really understand what was involved.

I would still say new wheels seem like a better route however, or better yet, fj60 axles :grinpimp:
 
My 36x12.5 Swampers Hit the Tub on Flex.. 3.5" BS 15x8 wheel.. Hence the need for some more width..

bustanutley, The IFS Kit Uses 86and up Toyota Spindles that have a different mounting for the wheel and will Widen your Front 3" overall.. But in order to use the Land Cruiser (or other Solid axle Rotors) you need a spacer between the Rotor and Spindle..

I think im just going to get some Bling new wheels with a 2" BS sounds like a better option than the spacers..
 
isotel said:
bustanutley, The IFS Kit Uses 86and up Toyota Spindles that have a different mounting for the wheel and will Widen your Front 3" overall.. But in order to use the Land Cruiser (or other Solid axle Rotors) you need a spacer between the Rotor and Spindle..


Not different spindle, different hub.
 
Back
Top Bottom