Can i keep my arb?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 18, 2006
Threads
313
Messages
2,096
Location
Alabama
I was thinking about trading my 4:88s for the 4:11s. Some guy who lives close to me is offering a trade. However I have an arb in the rear. He says that to make it easier, we should just switch the front and rear axles because that is the easiest way to do it. I also have a hydralic steering in my rig. Mine is a 79 40, his is a 72 40. He has added mini truck disk brakes in the front. My rear diff has been rebuilt. His has not, but his front has been rebuilt. I still have to pay for the labor but he says that it will be cheap. Should I do it???:confused: :confused: :confused: :confused: :confused: I am so confused on whether to do it or not because i will not put any tires larger than 35s, and my rpms are to high at 70.
 
factory 4.11's in a 72 is a coarse spline pinion - all aftermarket is fine spline, including your 4.88's....

significant downgrade IMO...
 
Yep-Don't do it, big loss for you. Is your friend really your friend?
 
Sure you can keep it.....with the 4.88's.


Or pay to have it removed and changed over to another 4.11 gear set....


I would not change anything on this truck.....but I do not see the need to do 70 in a Land Cruiser....


Purchase some spec for commuting if you need to go fast....


Good luck!


-Steve
 
I would not do it. Your Front axle is better than his out of the factory.....even though he has an upgrade. Fine spline is better than coarse. I would buy 4.11's and have them put on if you really need them but not trade like you mentioned.
 
I dont think you are getting a good deal with that trade.

Keep your junk in your trunk.

Rezarf <><
 
how can you even contemplate giving up an ARB locker? :rolleyes: :rolleyes: :rolleyes:
 
Claudia,

I have good pics of you and Mike from the Metal Masher run, PM me and I will shoot them your way.

Rezarf <><
 
Who'd like to have this kid as a neighbor? LOL!

Badass:eek: :rolleyes: ,

WHAT is your hangup with going 70 mph? Don't you know that your short wheelbase high center of gravity cruiser is unsafe at 60 mph?

These trucks aren't for highway cruising at high speeds - they're deathtraps doing that. If you really have to commute or something get a car just for that.

Look, there probably isn't anyone who will post in here that you were killed, and so this whole forum would never know what became of you. We would miss you!


Thinking about giving up perfectly good gearing with one of the best setups made, perfect for offroad use, for some jerk's older crapped together junk just so you can lower the racket at 70 mph??

Your priorities aren't behind having a land cruiser, son, maybe you should sell it. Half the people in here would love to have a truck setup like yours, and you come in here talking about screwing it up?

I'm sorry, but you're pissing me off.
 
honk said:
Who'd like to have this kid as a neighbor? LOL!

Badass:eek: :rolleyes: ,

WHAT is your hangup with going 70 mph? Don't you know that your short wheelbase high center of gravity cruiser is unsafe at 60 mph?

These trucks aren't for highway cruising at high speeds - they're deathtraps doing that. If you really have to commute or something get a car just for that.

Look, there probably isn't anyone who will post in here that you were killed, and so this whole forum would never know what became of you. We would miss you!


Thinking about giving up perfectly good gearing with one of the best setups made, perfect for offroad use, for some jerk's older crapped together junk just so you can lower the racket at 70 mph??

Your priorities aren't behind having a land cruiser, son, maybe you should sell it. Half the people in here would love to have a truck setup like yours, and you come in here talking about screwing it up?

I'm sorry, but you're pissing me off.

Honk, your speech has inspired me. Fxxx getting 4:11s. I'm keeping my damn 4:88s. And I'm ashamed that i even offered that guy to trade gears with me. Thanks honk, you have inspired me.:)
 
badass said:
Honk, your speech has inspired me. Fxxx getting 4:11s. I'm keeping my damn 4:88s. And I'm ashamed that i even offered that guy to trade gears with me. Thanks honk, you have inspired me.:)

glad to hear someone was able to get through to you ;) :beer:
 
Back
Top Bottom