Cam's FJ60 Gets a Heart Transplant
- Thread starter FJ60Cam
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #403
We are 
- Joined
- Apr 17, 2009
- Threads
- 17
- Messages
- 2,668
Hells yea!
- Thread starter
- #405
OBD mounted...
All the wires going into the truck were consolidated into one loom. I ordered a few different grommets from MMC, and found one that worked after a little cutting.
Today we got all the factory sensors wired up and cleaned up everything.
After topping off the fluids, we started it up and ran it for a bit to let it get up to temp and check for leaks.
Here's all the gauges working...
All the wires going into the truck were consolidated into one loom. I ordered a few different grommets from MMC, and found one that worked after a little cutting.
Today we got all the factory sensors wired up and cleaned up everything.
After topping off the fluids, we started it up and ran it for a bit to let it get up to temp and check for leaks.
Here's all the gauges working...
Last edited:
Heck of a job!! Doing it right takes a lot of time. Any driving videos or any more of the truck running?
- Thread starter
- #407
- Thread starter
- #409
What's wrong with my wipers?
I think that Mustang driver pooped his pants a little
I think that Mustang driver pooped his pants a little
- Thread starter
- #411
Did you actually pass someone?!?!
Hell ya!!!
Well done sir, well done.
I passed him with the tires spinnin'
Holy $&@# it's loud when you hammer it with open pipes.
Last edited:
- Thread starter
- #413
I got one on order!
- Thread starter
- #414
The video was from last night, when I took it to the exhaust shop. I showed up right when they opened this morning to be first in line.
I think I found the right shop...
Anyone that puts a pipe like that on a Central Park rider has to be legit.
I think I found the right shop...
Anyone that puts a pipe like that on a Central Park rider has to be legit.
Last edited:
- Thread starter
- #416
Here's another short video. It's just barely idling cruising down the street... til you mash the mowter to the desired mach level.
This is in the cab. All holes in the body are sealed up pretty tight. The boots are snugged seal-on-metal. Summbitch is loud at full tilt.
I'm putting on a pretty quiet muffler for daily driving/ interstate cruising purposes, but hopefully still lets it scream a little when called upon.
This is in the cab. All holes in the body are sealed up pretty tight. The boots are snugged seal-on-metal. Summbitch is loud at full tilt.
I'm putting on a pretty quiet muffler for daily driving/ interstate cruising purposes, but hopefully still lets it scream a little when called upon.
Badass!
Bodean
Hot Damn
40 series Flowmaster for a small block is the ticket! Let her talk to ya!
- Thread starter
- #419
I got it back
I like the guy's work. Nice layout, good craftsmanship, and no flux core at this shop.
I went with a 50 series. If anything, it's a little loud while cruising, but not loud enough when you get on it.
It's too wet to give 'er hell right now. But it gets up to speed EASILY.
It's an entirely different animal now. It might take me a while to wrap my head around its differences. Plus I haven't driven it in a long time.
(Chris, I went straight to the wiper shop when I left the exhaust place
)
Last edited:
- Thread starter
- #420
^^^ Not even breaking a sweat