Buyin', Sellin', and Tradin'

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Lowe Toyota said:
Anybody have a need for an open 8" diff or a forward shift T-case? They're collecting dust in my basement at the moment. PM me an offer.
Click to expand...

If it was a High Pinion Reverse Cut 8" diff I would be all about it...
 
Not in an 80 ft housing. The pinion will run into the tie rod.
 
That's what I thought...
 
71-CRUISER said:
Not in an 80 ft housing. The pinion will run into the tie rod.
Click to expand...

oh craps, we talking lowe pinion? I thought it was an existing 80 front dif... just open.
 
For sale :

8" hp diff with a brand new never run nitro 5.29.
 
ACC Toyota said:
No, We swapped Sams 1980 low pinion ft diff for an 80 high pinion. Hence the spare diff for sale.
Click to expand...

Yeah. That's why I don't really care about keeping it. I'm going to do springs and hi-steer and all that soon so I won't be going back to the LOWE pinion. If I break my junk I'll just limp it back on the trailer. I'm not gonna change a diff on the trail (Ted). :hillbilly:
 
Want to Buy - Tires, Shackles, Shocks

Extreme budget modding happening here. Looking for a few used/spare/NIB things until I scrape the money together for a proper lift.

Shackles - looking for some lift, I have one pair of (believed) OME anti-inversion, about 5-3/8 OC pins, need a dimension-matching pair or something similar. With or without usable bushings. My current height is pretty level, looking to keep it that way.

Shocks - Mine are shot, just looking for something reasonable to get by and that can tolerate a 1" +/- lift from stock.

Tires - 15's, 31 or 32 x 10.50, 11.50 or 9.50. Prefer an MT-similar tread. I have some AT's, just want more aggression. Anything with decent tread left, but must be balancable for highway use. For this I'm brand-agnostic.
​
Many thanks. Bummed I'm gonna miss y'all at ACC's shindig.

RJ
 
Bump (last one - promise)


rjs78 said:
2F tubular header and OEM intake with Holley 2bbl - for sale. These were on my 60 when I bought it, I do not know the previous owner, I have no information about these, and I'm a 2F newbie at recognizing pieces and parts. The carb is a Holley but I can't find any part/model number info. The truck was running well when I bought it, no stumbling or backfiring, started fine, some exhaust was leaking around 5/6. I went back to a stock exhaust (but kept the knockoff Flowmaster) and Troll Hole carb. Just wondering if anyone has any interest in these, or recognize anything about them. I have more pictures. I don't really have a use for these parts, and wanting to get some build funds together for the truck. Hoping these can be useful to someone.

Thanks, RJ

View attachment 665512

View attachment 665513
Click to expand...
 
Free body dolly
Built this to tote the 40 body. Worked like champ.
Let me know if you want it and come pick it up.


ForumRunner_20121111_194848.webp

It is in Rome, GA

Posted from a brick.

ForumRunner_20121111_194848.webp
 
Last edited:
FEELER

I am negotiating to by a 80 Series Cruiser and if successful I will put my 1987 ( first generation ) 4Runner on the market. It is in "way above" average condition with ZERO rust. 162,000 miles but only 22,000 on factory rebuilt engine. The vehicle is located in Thomasville (S.W.), Georgia. If there is any interest in this classic please drop me a P.M.
Thanks...
** photo on post 701
 
You must log in or register to reply here.

Share this page

Back
Top Bottom