Body Rust

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 22, 2015
Threads
4
Messages
13
Location
Wyoming/Georgia
Greetings,
Many miles and hours away from a frame off resto, how do I stop surface rust on the body panels? This is the even coat of 'powdery' rust that is forming where original paint is gone. If you swipe your hand across it you will have brown coloring on your skin (as illustrated). There is of course some "serious" body rust in the likely places, wheel wells, bottom of body panels, etc, and I will be patching that as I can in order to be restoring it as it is running, up until I commit to the whole frame off. Thanks again

IMG_5461.webp


IMG_5463.webp


IMG_5464.webp
 
That doesn't look like normal body rust. Rust on the body usually starts as small tiny rust spots that slowly grow outwards bubbling up the paint and damaging the underlying steel as it spreads.
It looks like your vehicle has been repainted in the past. Are you sure that that brown powder isn't oxidized paint?
 
That doesn't look like normal body rust. Rust on the body usually starts as small tiny rust spots that slowly grow outwards bubbling up the paint and damaging the underlying steel as it spreads.
It looks like your vehicle has been repainted in the past. Are you sure that that brown powder isn't oxidized paint?
Unfortunately, I do not know. How can I tell? Thanks for the help.
 
Polish a little spot and see what happens. If it's the clear coat turning to powder, polish won't help, but no harm in exploring further to see what's going on.
 
That doesn't look like normal body rust. Rust on the body usually starts as small tiny rust spots that slowly grow outwards bubbling up the paint and damaging the underlying steel as it spreads.
It looks like your vehicle has been repainted in the past. Are you sure that that brown powder isn't oxidized paint?
His rust is pretty much light surface rust on the body panels as a result of paint degradation. The paint on my 60 has been burned by South Western sun so badly that in places like the roof or hood the top coat is almost stripped away down to the primer. Once the paint is gone enough to reveal bare metal the light rust starts. If ignored it becomes the pitted or crunchy rot.


I keep my truck in the garage when not used. In winter I don't drive it and i've wiped the panels down with rags soaked in WD40 because the WD40 helps repel moisture...sort of a poor mans water repellent. I know I have to repaint in the future so I'm just preventing more damage in the mean time.
 
That doesn't look like normal body rust. Rust on the body usually starts as small tiny rust spots that slowly grow outwards bubbling up the paint and damaging the underlying steel as it spreads.
It looks like your vehicle has been repainted in the past. Are you sure that that brown powder isn't oxidized paint?
Vehicles out west (or down south) seem to rust differently. The paint gets beaten by the sun down to the primer, and then the panels start to lightly rust. Eventually you will get perforation, but it takes a long time.

Conversely in the Salt Belt states, it more seems like salt water gets under the paint through chip/scratch/whatever, and then starts spreading. Causing the paint to bubble up with aggressive rust.
 
  • Like
Reactions: OSS
Much of that looks like oxidized paint, but where the hood is turning black, you could be down to the metal or primer. Looks like it needs a serious washing with soap and a sponge, and to be parked indoors. The black on the hood could also be mildew, which can form on non-glossy paint.
 
i've wiped the panels down with rags soaked in WD40 because the WD40 helps repel moisture...sort of a poor mans water repellent.
My understanding is WD stands originally for 'water displacer' - wasn't it designed for/by NASA for safe use in space? Don't quote
me, thats why question mark.
There is a guy ( bad memory ) from the south with an FJ45 who rubbed linseed oil all over his truck to preserve the 'rust patina', but
it does actually maintain it without it seeming to continue to worsen. Someone here will remember who this is, but his truck
is preserved and looks darn cool too.
 
My understanding is WD stands originally for 'water displacer' - wasn't it designed for/by NASA for safe use in space? Don't quote
me, thats why question mark.
There is a guy ( bad memory ) from the south with an FJ45 who rubbed linseed oil all over his truck to preserve the 'rust patina', but
it does actually maintain it without it seeming to continue to worsen. Someone here will remember who this is, but his truck
is preserved and looks darn cool too.
Sounds about right. Patina works well on old land rovers with aluminum panels that don’t rust (bulkheads, joints, frames that do). But it’s a hard thing to “keep” with a land cruiser in a wet environment.
 
From our very own patina preservation wizard @wngrog:
 
My understanding is WD stands originally for 'water displacer' - wasn't it designed for/by NASA for safe use in space? Don't quote
me, thats why question mark.
There is a guy ( bad memory ) from the south with an FJ45 who rubbed linseed oil all over his truck to preserve the 'rust patina', but
it does actually maintain it without it seeming to continue to worsen. Someone here will remember who this is, but his truck
is preserved and looks darn cool too.
I’m not sure if nasa was developing it. But, they were searching for a water displacement chemical for some highly technical process if I remember correctly. WD is water displacement. The 40 is the 40th formulation that they tried. Turns out that blend was wonderful for squeaky hinges, rusty bolts, and greasy parts... they also marketed it as a wound cleaner and a kitchen disinfectant wonder chemical when it was first sold to the public...🤯 I recall seeing an old black and white commercial where mom sprays wd40 on jimmy’s scraped knee before putting a bandaid on it and then she turns around and cleans the stove with it.... can you imagine if your wife took your can of WD40 to clean the kitchen?!?
 
Thanks for the response, guys. I know it is likely a paint problem on at least some of the car, as the clearcoat has visibly deteriorated off, but these spots do seem like the feel, smell, and texture of rust. It has been in Georgia the last few years and the rain this year has been remarkable. I think the black on the hood is some mildew. After a thorough wash, are my options linseed oil or WD40 nasa juice in order to slow down the rust? Thanks again.
 
An easy place to start is just to wash it with some good soap. Get all the scum off and see what the surface looks like. On the hood you could take a soft rag and some wd40 and just picks a spot to work for a few minutes. The WD40 is actually good at cleaning off grime and might help reveal whats really going on there.
 
Back
Top Bottom