Best Carb ??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 24, 2011
Threads
37
Messages
705
Location
Stouffville Ontario
Hi guys, I was considering the AFI system but after the bad experience I had with my Shelby Cobra and it seems what some guys are experiencing here with FI on their 2F I'm considering just getting a new carb or getting mine rebuilt.

Eventually I will put in a SBC TPI and new 5 speed tranny so better off saving the cash for that.

I'm up here in Canada, the cold start issue, smoother running, improved acceleration is what I'm after.

Can someone recommend and have contact info for a guy to do a carb rebuild, or I don't mind buying a new one. I know Trollhole sells them for a great price but doesn't seem to have any in stock.

And what about aftermarket carbs, anything work well, with easy adjustability?

Thanks for the help
Steve
 
Are these carburetors particularly difficult to rebuild? I've never rebuilt one (or seen one up close), but I've rebuilt a number of other carburetors and none of them have been terribly difficult. In fact, I rejet my webers on the go as I go up in altitude... Maybe not on the go per se, but at a gas station (this is in a VW bus, and it's a little better access than a stock 2F, but still). Get a rebuild kit, spend a Saturday being slow and methodical (take pictures if need be), and do it yourself. You'll feel like you accomplished something and you'll have a better understanding of the machine.
 
Hi guys, I was considering the AFI system but after the bad experience I had with my Shelby Cobra and it seems what some guys are experiencing here with FI on their 2F I'm considering just getting a new carb or getting mine rebuilt.

Eventually I will put in a SBC TPI and new 5 speed tranny so better off saving the cash for that.

I'm up here in Canada, the cold start issue, smoother running, improved acceleration is what I'm after.

Can someone recommend and have contact info for a guy to do a carb rebuild, or I don't mind buying a new one. I know Trollhole sells them for a great price but doesn't seem to have any in stock.

And what about aftermarket carbs, anything work well, with easy adjustability?

Thanks for the help
Steve

Trollhole is my vote! If he doesn't have any right now I'm sure he will soon. My trollhole carb works perfect and you can't find a better guy to work with IMO. A rebuilb will probably run you more money than a new carb from trollhole, unless you do it yourself of course.
 
Eventually I will put in a SBC TPI and new 5 speed tranny so better off saving the cash for that.
Steve

Mark and Jim will ship your carb. back to you better than new. But, if you're just trying to buy some time and same some money, don't hesitate to just rebuild it yourself. The Aisan carb is excellent when it's properly tuned.

Pin_Head's video tutorial makes it very doable:

Rebuilding an Aisan Carburator Part 1 by Pin Head.mp4 - YouTube
 
FJ40Jim said:
Best carb is the big 75-76 USA 2F carb.
Second best is the 75-80 CA-spec 2F carb.

X2

I agree the Asian carb is the way to go. Just to give you a quick run down I just pulled my Downey TBI off my 76 I just bought because I could not get it running right. Just got all the factory carb and linkage ordered and will be going that route. If you are keeping the 2f motor you can never go wrong with the stock setup.
 
Webers are no good. A properly set up Holley is awesome on the street, but most here are not Holley fans since they suck off road.

Fixed.


Best carb is the big 75-76 USA 2F carb.
Second best is the 75-80 CA-spec 2F carb.

Curious to know why. I have one of each. :)
 
Sheck44 what are planning on doing with the rig ? The question about Carbs has been going on for years depending on who you ask your going to get just as many answers. I have a 1973 FJ40 orginal 1F motor been running a Weber carb for over 20 years without a problem and its been from Moab to the Rubithon. A 1967 FJ45 with a 1974 1.5F running a 1971 carb thats gotten me to Iowa, Texas and all parts in between. I have a new 2F I will be running a Trolhole carb for the first time Spend some time in your FSM but a kit at Nappa or where ever. Dont get me worng I have alot of Respect for guys like Jim C he does fantastic work. Cant hurt to try to rebuild it yourself,
 
Best carb is the big 75-76 USA 2F carb.
Second best is the 75-80 CA-spec 2F carb.


I personally prefer the one I have...a very late '74 Cali carb. It still has the mechanical secondary. You can tweak the linkage to have the secondary open earlier or later in the pedal, and I just don't trust the vacuum secondary.
 
Rebuilding your own is pretty straightforward. (Assuming you are organized and careful with details)
Pinhead did a series of YouTube videos on the process. I had rebuilt a bunch of carbs when I was younger but it's been quite a while. These videos showed me all of the Aisan specific stuff that I needed to know.
I took it off and took it apart one evening, soaked it overnight, and had it back together and tuned in a few hours the next day.
 
As requested, my best work to date (sold 2009) ... will do another some day

IMG_2811.jpg
 
Last edited:
Best carb is the big 75-76 USA 2F carb.
Second best is the 75-80 CA-spec 2F carb.

Lucky me! i got a desmogged '75 2bbl sitting on my 2F. still needs a rebuild, but after I took the top off of it, and got everything shiny, it runs like a raped ape at about 3500 rpm with that 2nd bbl kicking in.
 
Back
Top Bottom