For Sale AZ - Supercharger for 4.5L FS (1 Viewer)

Joined
Sep 20, 2016
Messages
59
Location
Chandler, AZ
Wanted to give you guys 1st dibs before putting on ebay.

80 series Land cruiser supercharger for sale. This is NOT a full kit. This is just for the supercharger, pulley, and pulley spacer as seen in the photos.

I bought this as "new old stock". It looks like it as well, however, personally I would give it an 9/10 on the "new" scale, as there are a couple of chips / blemishes in the powdercoat, and paint chipped on the pulley; nothing that looks like it would affect performance though.

Take a look at the picture, what you see is what you get. There are no bolts, no fuel pump, no lines, you'll have to get creative make this work for your vehicle.

They stopped making these about 5 or 6 years ago , so basically this is the next best thing to gold for 80 series LandCruiser owners.

I thought I was going to have the time to make this work, but got into road course racing and... - too many hobbies, not enough time. Might as well let someone else make use of this as it has been sitting on my bench for about a year...

Prefer to sell locally,, but It is all packed and ready to ship. The box is 17" x 15" x 15" and weighs 32 lbs - so feel free to look up shipping prices with UPS, FEDEX or USPS to get an idea of shipping (+ insurance, delivery signature, etc.).

$3,000
Gilbert, AZ 85233

$_57 (1).jpg


$_57 (2).jpg


$_57 (3).jpg


$_57 (5).jpg


$_57 (8).jpg
 
Joined
Sep 20, 2016
Messages
59
Location
Chandler, AZ
That was my thoughts when I bought it.

Since these superchargers are super rare, I got it while it was available and figured I would gather up the hoses, belts, etc., or make whatever else would be needed as I went along. I figured all the impossible to make parts were already here, so the rest should be doable. Just haven't had time to really dig into this project so I don't really know any more than when I bought it.
 
Joined
Jan 26, 2010
Messages
876
Location
Clovis, CA
I think the two biggest hurdles would be the Throttle Body adapter and the Intake Runner. The Runner wouldn’t be difficult to fabricate.

I’m researching this too. As this is an enticing purchase for a CARB resident.
 
Joined
Nov 30, 2019
Messages
26
Location
Washington DC
To make complete kit, it needs throttle body with bypass valve, intake runner, longer crank bolt, fan blade, fan spacer/ longer studs, brake booster pipe, coolant pipe, tension pulley assembly with idler pulley, belt, elbows and clamps, and some nuts and bolts.
 
Joined
Sep 20, 2016
Messages
59
Location
Chandler, AZ
To make complete kit, it needs throttle body with bypass valve, intake runner, longer crank bolt, fan blade, fan spacer/ longer studs, brake booster pipe, coolant pipe, tension pulley assembly with idler pulley, belt, elbows and clamps, and some nuts and bolts.
Nice List! Looks pretty easy to get that stuff or fabricate what is no longer available. The more I remember about this project, the more I realize there is not that much left to make this install happen. Got my gears turning on this project again...
 
Joined
Nov 30, 2019
Messages
26
Location
Washington DC
To make complete kit, it needs throttle body with bypass valve, intake runner, longer crank bolt, fan blade, fan spacer/ longer studs, brake booster pipe, coolant pipe, tension pulley assembly with idler pulley, belt, elbows and clamps, and some nuts and bolts.
Nice List! Looks pretty easy to get that stuff or fabricate what is no longer available. The more I remember about this project, the more I realize there is not that much left to make this install happen. Got my gears turning on this project again...
$1000 I take it
 
Joined
Sep 20, 2016
Messages
59
Location
Chandler, AZ
replied to all thus far. FYI: I'm in no hurry to sell - just finally got motivated to post some stuff.
 
Last edited:

Users who are viewing this thread

Top Bottom