PS the brush guard fits on my 62 but the bar obscures part of my double headlight array. here's a pic of the light tabs.
Arizona Classifieds / For Sale / Wanted
- Thread starter blatant
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
For Sale: 97 LX 450 232k original miles $12,500. Approximately $14,000 in maintenance records since I have owned it over the past 3.5 years. Much more spent on modifications and maintenance that I don't have records for. Some of the things I have had done/replaced since owning it:
Rebuilt engine 50,000 miles ago
Recent head gasket job done with ARP head studs
Fan clutch
Thermostat
Water pump
Power steering pump
Brake master cylinder
Brake booster
Front and rear brakes both done in Dec 2016
Engine mounts
U Joints on rear and front driveshafts
Rebuilt front driveshaft
A/C compressor
Radiator
Pesky Heater Hose( PHH) replaced with Samco silicone hose and constant torque clamps
Tie rod ends
Front suspension bushings and some rear
Windshield washer pump
Hood struts
Spark Plug wires
Coolant hoses
Drive belt
Knock sensors
All the EGR equipment (permanently fixed so it will never throw a code again)
Just recently had the cooling system flushed and AC system serviced
Brand new windshield
These are the main things that I have records for. There is some minor stuff I haven't listed. I had all service done at Camelback Toyota by their very Land Cruiser savvy tech (Tom). They know me well and every time I take it in a have them look over everything and I have had everything fixed that they recommended. I just had it in a couple weeks ago.
Modifications done:
Aussie locker in rear
CDL switch
TJM Progressive 2.5" springs
TJM Caster correction bushings
OME Steering stabilizer
Icon 2.0 shocks
LCP Swaybar QD's
Swaybar drop spacers
Snorkel
Blue Sea fusebox
USB ports for charging
Extra 12V plug
Pioneer touchscreen bluetooth in-dash DVD
Rear DVD drop-down screen
Depo lights with LED's all around
Front Runner Roof Rack
5 315/75/16 BFG KO2's that are 2 years old. 4 have 9/32 tread and the 5th is never used.
Dometic CDF-11 console fridge/freezer
That's all I can think of at the moment but I'm sure I'm forgetting something. I do have the 3rd row seats, just not pictured. I also have the stock console if you don't want the fridge/freezer (I'd knock a few hundo off if you don't want it). Truck isn't perfect but it's in great shape for almost 22 years old and. The only thing I would have done (if I wasn't getting rid of it) would be to get the camber correction bearing from Slee to correct the slight camber issue. It isn't hurting anything, but with it the alignment would be perfect. As it is it pulls right when you're on a road with any crown or slope. If it's flat it isn't really noticeable. Also, the oil pressure gauge has recently stopped working all together. It was working intermittently, but has stopped working completely within the last few months. PM if you have any questions or want to see the truck.
Rebuilt engine 50,000 miles ago
Recent head gasket job done with ARP head studs
Fan clutch
Thermostat
Water pump
Power steering pump
Brake master cylinder
Brake booster
Front and rear brakes both done in Dec 2016
Engine mounts
U Joints on rear and front driveshafts
Rebuilt front driveshaft
A/C compressor
Radiator
Pesky Heater Hose( PHH) replaced with Samco silicone hose and constant torque clamps
Tie rod ends
Front suspension bushings and some rear
Windshield washer pump
Hood struts
Spark Plug wires
Coolant hoses
Drive belt
Knock sensors
All the EGR equipment (permanently fixed so it will never throw a code again)
Just recently had the cooling system flushed and AC system serviced
Brand new windshield
These are the main things that I have records for. There is some minor stuff I haven't listed. I had all service done at Camelback Toyota by their very Land Cruiser savvy tech (Tom). They know me well and every time I take it in a have them look over everything and I have had everything fixed that they recommended. I just had it in a couple weeks ago.
Modifications done:
Aussie locker in rear
CDL switch
TJM Progressive 2.5" springs
TJM Caster correction bushings
OME Steering stabilizer
Icon 2.0 shocks
LCP Swaybar QD's
Swaybar drop spacers
Snorkel
Blue Sea fusebox
USB ports for charging
Extra 12V plug
Pioneer touchscreen bluetooth in-dash DVD
Rear DVD drop-down screen
Depo lights with LED's all around
Front Runner Roof Rack
5 315/75/16 BFG KO2's that are 2 years old. 4 have 9/32 tread and the 5th is never used.
Dometic CDF-11 console fridge/freezer
That's all I can think of at the moment but I'm sure I'm forgetting something. I do have the 3rd row seats, just not pictured. I also have the stock console if you don't want the fridge/freezer (I'd knock a few hundo off if you don't want it). Truck isn't perfect but it's in great shape for almost 22 years old and. The only thing I would have done (if I wasn't getting rid of it) would be to get the camber correction bearing from Slee to correct the slight camber issue. It isn't hurting anything, but with it the alignment would be perfect. As it is it pulls right when you're on a road with any crown or slope. If it's flat it isn't really noticeable. Also, the oil pressure gauge has recently stopped working all together. It was working intermittently, but has stopped working completely within the last few months. PM if you have any questions or want to see the truck.
More pics.......
Just going on the info here, that's one of the few trucks I've seen for sale that looks like it's worth the price.
I'm a cheap mofo, so you should probably consider raising it.
I'm a cheap mofo, so you should probably consider raising it.
It's not triple locked so I subtracted $10,000.
Just going on the info here, that's one of the few trucks I've seen for sale that looks like it's worth the price.
I'm a cheap mofo, so you should probably consider raising it.
Found this 2003 LC on Auction Nation website this morning. The vehicle is being auctioned in Mesa. 9 hours left in the auction at $750 looks like a steal although I did not search the VIN and service history. Good luck to anyone bidding.
2003 Toyota Land Cruiser 4 Door SUV VIN#JTEHT05J332033784
2003 Toyota Land Cruiser 4 Door SUV VIN#JTEHT05J332033784
Went for about $6500. I was all over it up to $4500. Thanks for the heads-up!
I'd like this stuff gone today. I'll let guys here grab what they want while I have it.
Jim
623-285-3499
All of this
Jim
623-285-3499
All of this
Got strangley lucky and got one of the last 80 series remote fobs around. If you can find one, grab it up!
My 97 did not come with fobs or remote locks. It did however come with the module (is tgat the right word for the black box that talks to the fob) and If I can find the factory plugin, Inwas going to get keyfobs. Do I have to use an 80 series fob, or is there another yota or aftermarket fob that will talk to it?
It would need to be an 80 fob due to frequency set ups with the alarm brain. I have never been able to find an aftermarket that would work. I was wondering if the LX450 lexus part number for the fob would work? I would think it should, anyone know?
Im sure you can still find 80 remotes around on Ebay or in individual stores. The part # is PT398-07100
Thanks for the p/n.
Murf, it did not. We tried an LC on my LX (at CT) and your techs could not get it to work. So, we are outa luck...
Pelican Hard Case perfect for camera gear or other waterproof needs. Approximate interior dimensions are 5''x12''x9" $40 (no foam inserts) (stock photo)
How about this?
https://www.amazon.com/dp/B018415EMA/?tag=ihco-20
I haven't tried it but might if mine goes out
