Actual Tire Sizes Thread.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 10, 2010
Threads
141
Messages
1,365
Location
San Diego
We all know that just because a tire is advertised at a certain size, it rarely is that size in real life. Some run big, some run small. I am currently searching for a new 37" tire for my rig and I have compiled actual tire heights, and weights for 37" tires. Here is what I have so far. Hopefully I can update this with other popular sizes 32(285),33,34(315),35 etc... If anyone want to add specs up please feel free I will start posts for different sizes and edit them as information is collected. Please make sure its actual size, mounted, when the tire is brand new. Obviously, the height will vary slightly depending on the rim width.
 
Last edited:
37" Tires.

345/75 R16 BFG KM2 Radial -74lbs- 36.40"
385/70 R16 Nitto Mud Grappler Radial -90lbs- 37.72"
37x12.5 R16 Interco SSR Radial -90lbs- 36.90"
37x14 R16 Interco Irok Bias -71lbs- 36.90"
37x12.5 R16 Interco Irok Radial -89lbs- 36.90"
37x12.5 R16 Interco Irok ND -74lbs- 36.70"
37x13.5 R16 Interco M16 Radial -79lbs- 37.00"
13/38/16LT Interco TSL Bias -73lbs- 37.80"
37x12.5 R16 Interco Trxus MT Radial -79lbs- 37.20"
385/70 R16 Toyo Open Country M/T Radial -97lbs- 37.71"
37x12.5 R16 Maxxis Creepy Crawlers Bias -75lbs- 36.8"
37x13.5 R16 Pitbull Rocker Bias -74lbs- 36.45"
37x12.5 R16 Pitbull Rocker Radial -85lbs- 37.10"

37x12.5R17 Cooper Discoverer STT -74lbs- 36.2" Tread Width 10.2"
 
Last edited:
Cooper Discoverer STT 37x12.5R17LT, Published specs:
Section Width 13.1" Overall Diameter 36.9" Tread Width 10"

Mounted on Tundra 7.5" rims, measured on my rig:
Section Width 12" Overall Diameter 36.2" Tread Width 10.2"

IIRC, the UPS shipping label said 74lb.
 
Last edited:
When my toyos was new on stock wheel was 34.8" 28PSI on it ..

I'm looking for a true 35.6 - 35.8" tire if I can for a future replacement ..
 
Trxus MT 37x12.5x16 - 36" measured on my rig using a level at 30 PSI.

Edit: I bought a new 37" Trxus spare. Unmounted it measures 37.2", right on the specs published by Interco.
 
Last edited:
37x12.50 15s mtrs are 35.5 " 10" wheels 32psi on my fj80.
 
Not new 40" MTRs ..

main.php
 
I am looking for a set of "37s" as well.


I hope your attempt at finding actual tire size goes better than mine did:

https://forum.ih8mud.com/hardcore-corner/356269-actual-tire-size-thread.html

It went over better on pirate, surprisingly.

Here is my post and tire sizes:

Am i the only one that is pissed off about when you read the sidewall of a tire and it says 35x12.50R16 and it measures out to be 33 inches tall versus the advertised 35 inches? Its not like the price "35" inch tire is the price of a 33.
I just want to get what i paid for!

I feel i have to ask people who have bought the exact tire that i want, to go out and measure the tires for me. Unfortunately the tires that i want are not at the local stores, or I would just go measure em myself. when i order tires online and look at the tire chart and it reads that a 35 is 34.8 inches in diameter i would hope that it would be close. It simply is not. I have heard the argument that the tires are measured at 80 psi. 80psi ?!?!? who ever runs there tires at 80psi. that's the equivalent of the EPA measuring mpg when traveiling 50 mph. who goes 50 mph anymore?! speed limit is 70mph.

So what I am proposing is that we start a thread with ACTUAL TIRE sizes posted. I will start it off.

Toyo Open Country MT 38x15.50R16 (sidewall) actual size 36x14R16 at 15 psi on 16x10 inch wheels

Mickey Thompson Baja ATZ 36x15.50R16 (sidewall) actual size 34x14.50 at 35psi on 16x10 inch wheels

Remington Mud Brutes 315x75R16 (sidewall) actual size 34x12 at 35 psi on 16X8 wheels


Super Swamper TSL bias ply 36x12.50R15 (sidewall) actual size 34.5x12 at 30 psi on15x5.5 inch wheels

feel free to copy and paiste. I would like this to be a sticky at some point!
 
irok nd mounted on wheel but not on rig, psi 40 measures 36" exactly

on stock 8" wheel? what is the published tire dimension?
 
Something that should be interjected into this kind of thread is, "How do those numbers and letters relate to the actual size of a tire?"

Example: 315/75R16
How this actually breaks down:
The tire should be 315mm wide (yes, millimeters).
The / is just a slash to separate the numbers.
The next number, in this case 75 is the aspect ratio. More on this upcoming.
The R is Radial. Other options are B for Bias and D for diagonal.
The final number, 16 in this case, is the diameter of the rim in inches.

I have no idea why we ended up with a tire size system that mixes two types of linear measures (mm and inches).

The aspect ratio confuses a lot of people. It is NOT the sidewall height.
It is the RATIO of the sidewall height to the nominal width of the tread. In the case of this example, it literally means that the sidewall height is 75% of the width of the tread. So - the sidewall is 0.75*315 = 236.25mm.

To find the diameter of a 315/75R16 tire then, you should be able to solve this:
2(0.75*315mm)+16"
472.5mm+16"
472.5mm+406.4mm
878.9mm = 34.60"

So, a 315/75R16 tire SHOULD be 34.60" in diameter.

The reality is that manufacturer's labels of the size of a tire are often something not quite the same as they're physical size. They should be darn close though.

Quick annotation... There IS another system for tyre (not tire) sizing used in other parts of the world and by the US military. It takes the form of 9.5R16.5 or 9.00R16 or the like. 16.5 is the rim diameter. The 9.5 in these cases is the tread width. From what I can tell the aspect ratio is assumed to be 85 on these - but I'm not sure if that is a 'hard rule'.

Have fun with it at your next opportunity to look like a know it all.
 
Quick annotation... There IS another system for tyre (not tire) sizing used in other parts of the world and by the US military. It takes the form of 9.5R16.5 or 9.00R16 or the like. 16.5 is the rim diameter. The 9.5 in these cases is the tread width. From what I can tell the aspect ratio is assumed to be 85 on these - but I'm not sure if that is a 'hard rule'.


funny that is how all tires used to be measured back before radials construction.
in the days of cross-ply tires there was no need for an aspect ratio because the
construction dictated a 1 to 1 ratio...










...damn i'm old. :frown:
 
Disappointed

My Trxus 35x12.50's. :frown: Factory (8" rim), 35 psi. This one is brand new and just replaced my defective one; (500 miles max). This means my old 315 BFG's must have been 33's since these are defiantly larger.

4c12827f.jpg

37597fba.jpg
 
Back
Top Bottom