'91 getting locked?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 21, 2018
Threads
14
Messages
67
Location
Steamboat Springs, CO
Is it worth it to purchase an '91 and go through with installing the lockers? Is there anything other than cost that I should look into before doing so?

I have a great lead on an '91 and want to install lockers, just don't know if 1. the engine will be alright handling lockers and if it will all preform well once its said and done.

Appreciate all info and thoughts!

A million thanks in advance,
Tg
 
If you're on a limited budget, nothing wrong with a 3FE 80 series. Yes, it will be slow, but so what. Almost all Land Cruisers are slow. And the 3FE is durable if not very powerful.

Lockers do not add to the load on the motor. That's an odd statement.

It's also an easy swap to put the rear full float axle from a later truck in your '91 which opens up more locker choices, and eliminates the rare 91-92 inner axles, making spares in the event of breakage easier to handle.
 
i have a 91 3fe and wouldnt trade if for anything else. The idea of knowing your head gasket not going to blow up pushing the motor hard is worth is alone, plus the cloth seats are superior. The money you can save can use for lockers upgrade, regearing and the difference in power is negligible...no brainer for me
 
Perhaps a Aussie locker in the rear? You already have the center diff lock switch. I bet this combo gets you everywhere you need to go and only sets you back a few hundred bucks.
 
i am in the middle of doing the 4.88 regear and ARB lockers, i debated going with lunchbox or aussie locker in the rear, but ended up spending a little more for a selectable locker...BTW...91 3fe is actually lighter than 1fz-fe due to less electronics and fancy gadgets to break.
 
Anyone that says the 3FE is “ slow” compared to the 1fz is either A) a fool or B) never driven one. The 1fz has what..... an additional 50hp? Yea, it’s needed to haul around the extra “garbage”. My 3FE will, and does, hang on any highway in America.
On to OP’s question now- my 91 has an Aussie rear, and I wouldn’t trade it for the world! I find I don’t really need front locker (try to stay out of rocks! Lol), but if I did find I needed one I would go with Aussie rear and ARB front. From talking to people with the ARB up front, they love it. Proven, rock solid design, just route your air line carefully!
Enjoy your ride, and smile knowing you have no need to worry about head gaskets letting go, or your phh springing a leak! Just dump beer in the crankcase, and piss in the fuel tank and let the mighty 3FE go!
 
Anyone that says the 3FE is “ slow” compared to the 1fz is either A) a fool or B) never driven one. The 1fz has what..... an additional 50hp? Yea, it’s needed to haul around the extra “garbage”. My 3FE will, and does, hang on any highway in America.
On to OP’s question now- my 91 has an Aussie rear, and I wouldn’t trade it for the world! I find I don’t really need front locker (try to stay out of rocks! Lol), but if I did find I needed one I would go with Aussie rear and ARB front. From talking to people with the ARB up front, they love it. Proven, rock solid design, just route your air line carefully!
Enjoy your ride, and smile knowing you have no need to worry about head gaskets letting go, or your phh springing a leak! Just dump beer in the crankcase, and piss in the fuel tank and let the mighty 3FE go![/QUOTE

Well said....no ABS, no cracked leather to slide around while wheeling, no broken electric seats, no OBDII fuss, no starring at temp gauge worrying about HG about to blow, no PHH to leak, no silly cat placement to hang up on rocks, ample room in engine bay to wrench..oh, and no annoying seat belt warning sound, not sure if the seat belt warning lights broke or what, but i am loving it...
 
People here hate on the 91/92, but they are a better deal usually and are for all intents and purposes the same thing as the z just a little bit slower. 99.9% of people out there in real life and on the road won't be able to tell which kind you have.
 
Looping back to the start. You live up in the mountains, buy the 91', drive it, enjoy it, add a locker if the need arises. Don't go crazy big on the tires and you'll be A ok. Send photos.

Been there a bunch of times. Steamboat is pretty high altitude, and if the OP is going up to Rabbit Ears often, it is over 14,000 ft. So, buy it, base line it, start doing all the cheap n easy things you want for it, and save up some $&& for rehearing to bring back SOME of the zip it used to have back down @ sea level.
 
Anyone that says the 3FE is “ slow” compared to the 1fz is either A) a fool or B) never driven one. The 1fz has what..... an additional 50hp? Yea, it’s needed to haul around the extra “garbage”. My 3FE will, and does, hang on any highway in America.
...

Have driven and worked on all of the US spec '80s and hate working on the 3FE, has the most stuff that is a pain. Yes, "only" 50hp, like that is insignificant, also the later trans is significantly more efficient. They maybe capable of maintaining the same speed where you live. But here, when traveling with a group, the '93 & '94 rigs become smaller in the rear view, the 3FE rigs are often so far back that they are out of radio range, on arrival at the destination have to wait on them.

It could be successfully argued that none of them are American highway friendly. But the OBD2 rigs are less of a road block than the others, significantly so. Drive what you like, but no need to spread BS and hyperbole, it is what it is?:hillbilly:
 
Have driven and worked on all of the US spec '80s and hate working on the 3FE, has the most stuff that is a pain. Yes, "only" 50hp, like that is insignificant, also the later trans is significantly more efficient. They maybe capable of maintaining the same speed where you live. But here, when traveling with a group, the '93 & '94 rigs become smaller in the rear view, the 3FE rigs are often so far back that they are out of radio range, on arrival at the destination have to wait on them.

It could be successfully argued that none of them are American highway friendly. But the OBD2 rigs are less of a road block than the others, significantly so. Drive what you like, but no need to spread BS and hyperbole, it is what it is?:hillbilly:

Didn't know 93s and 94s have 3FEs....must have blown the HGs and dropped in a 3fe replacement. =)
JK...just pros and cons.
 
I would buy the 91, install the lockers and enjoy the hell out of it.

I'm the proud owner of a 91 FJ80. Yes, it is slow on the highway but it has taken me everywhere i've wanted to go.
 
clean 80 (any year) > OBD2 1FZ with lockers > OBD1 1FZ with lockers >OBD2 1FZ unlocked > OBD1 1FZ unlocked > 3FE 80 in that order.

yes, i would take a clean 3FE truck over a locked OBD2 rig any day. a good, clean truck with no rust is all that matters imo. you can change the axles, add lockers, put on engine mods... but once a truck is wrecked or rusted out you are always and forever fighting a downhill battle.
 
Didn't know 93s and 94s have 3FEs....must have blown the HGs and dropped in a 3fe replacement. =)
JK...just pros and cons.

Was attempting to compare the 3 generations of '80s, will try again. If you are going uphill on the highway, in a '93 or '94 (1FE/auto) and keeping up with an OBD2 rig (1fz/auto, '95 to '97) it's because the OBD2 driver(s) are being charitable, waiting on you. Most of us don't have enough charity to slow down to 3FE crawl "speed". :hillbilly:
 
Back
Top Bottom