'91 getting locked?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Was attempting to compare the 3 generations of '80s, will try again. If you are going uphill on the highway, in a '93 or '94 (1FE/auto) and keeping up with an OBD2 rig (1fz/auto, '95 to '97) it's because the OBD2 driver(s) are being charitable, waiting on you. Most of us don't have enough charity to slow down to 3FE crawl "speed". :hillbilly:
If
clean 80 (any year) > OBD2 1FZ with lockers > OBD1 1FZ with lockers >OBD2 1FZ unlocked > OBD1 1FZ unlocked > 3FE 80 in that order.

yes, i would take a clean 3FE truck over a locked OBD2 rig any day. a good, clean truck with no rust is all that matters imo. you can change the axles, add lockers, put on engine mods... but once a truck is wrecked or rusted out you are always and forever fighting a downhill battle.
Was attempting to compare the 3 generations of '80s, will try again. If you are going uphill on the highway, in a '93 or '94 (1FE/auto) and keeping up with an OBD2 rig (1fz/auto, '95 to '97) it's because the OBD2 driver(s) are being charitable, waiting on you. Most of us don't have enough charity to slow down to 3FE crawl "speed". :hillbilly:
Nice one, way off topic now, but I will play... if you are so concern about speed, perhaps you are in the wrong type of vehicle. You guys act like your obd2 rig has 500 hp, but in reality, just so
Was attempting to compare the 3 generations of '80s, will try again. If you are going uphill on the highway, in a '93 or '94 (1FE/auto) and keeping up with an OBD2 rig (1fz/auto, '95 to '97) it's because the OBD2 driver(s) are being charitable, waiting on you. Most of us don't have enough charity to slow down to 3FE crawl "speed". :hillbilly:
0
 
To be fair the FJ80 has slightly awkward gearing where uphill grades at highway speed will put you below 2000RPM in 4th gear, it seems like the FZJ80 has just enough power to not have the slowdown. The FJ80 is even slower uphill than my 22RE pickup was, and in fact slower than anything else I've owned. I think there's no question the 1Z is the better engine since it's more powerful while maintaining the same MPG and reliability.
 
Have driven and worked on all of the US spec '80s and hate working on the 3FE, has the most stuff that is a pain. Yes, "only" 50hp, like that is insignificant, also the later trans is significantly more efficient. They maybe capable of maintaining the same speed where you live. But here, when traveling with a group, the '93 & '94 rigs become smaller in the rear view, the 3FE rigs are often so far back that they are out of radio range, on arrival at the destination have to wait on them.

It could be successfully argued that none of them are American highway friendly. But the OBD2 rigs are less of a road block than the others, significantly so. Drive what you like, but no need to spread BS and hyperbole, it is what it is?:hillbilly:

You must work on thousands........ 94 With 3FE? Learn something new everyday! I’m spreading hyperbole? Cause nobody ever talks s*** about the 3FE........go slam your head with the hood again, it will help clear the bs out of your head!
 
Was attempting to compare the 3 generations of '80s, will try again. If you are going uphill on the highway, in a '93 or '94 (1FE/auto) and keeping up with an OBD2 rig (1fz/auto, '95 to '97) it's because the OBD2 driver(s) are being charitable, waiting on you. Most of us don't have enough charity to slow down to 3FE crawl "speed". :hillbilly:

Go away.... just go away
 
Wow! Thanks a million for all the info and insight. I will take it all into thought we finding a perfect 80 series. This is the reason I love forums like these! I will make sure to post photos along the way of the progress when I get it started! Most photos on Instagram, like below. Again really appreciate it and I will be asking a ton more questions!
Instagram - Tuck Graham (@_tg____) • Instagram photos and videos
 
Yeah, FWIW, I love my old 3fe 80. It's not fast, but after 26 years she's still running strong, has never left anyone stranded, and provides plenty of power - and power in the right places - for dirt touring on 33s with stock gears. It's honestly hard for me to imagine a better rig for that. Comfortable, capable, reliable, and now classic -- year after year, decade after decade. Getting your hands on a good one, locking it or not, is a fine idea, IMO.
 
Last edited:
Wow. Another 3F-E vs. 1FZ-FE thread. How unusual...

Purchase the vehicle that speaks to you. It makes no difference what others think, because it's yours. Anyone else's opinion doesn't matter.

I had a 91 with 4.88 gears, ARB lockers front/rear, and 33" street tires. I owned this truck since I drove it off the dealer's lot in 1991 and sold it to a club member 2 years ago. Drove it cross country dragging an M416 trailer a few times and wheeled some of the most difficult trails in the country. It's still running strong and my 97 LX450 cowers in fear whenever we meet it on the trail.

The 97 is more refined with the leather seats and all the fluff that makes it so. They are both great trucks for what they are, but if highway speed is all you're concerned with, then you have no business purchasing an old Land Cruiser in the first place.
 
Is there a difference in torque/horsepower rating between OBD1 & OBD2. I though they were basically the same.
 
Is there a difference in torque/horsepower rating between OBD1 & OBD2. I though they were basically the same.

Yep the motor is the same, with the same published spec. When pointed uphill, the OBD2 rigs consistently have a slight advantage. Maybe due to the A343 being more efficient? But can't discount the possibility of OBD2 having better tune, motor control?

Fully agree that none of them are highway monsters, where they shine is on the trail. Unfortunately for me, highway travel is required to get to the trails.
 
I would agree that the best 80 is the most rust and damage free one that you can find. That is the criteria I used. Lucked out with a completely rust free 94 triple locked 260kSoccer mom Reg.
The day I Brought it home, 2018 Cruise Moab

2AE70BEF-AA47-41E4-A101-19B198277D21.webp


82ADD7F7-A47F-44AB-BBBC-2F079E4429C7.webp
 
Wow! Thanks a million for all the info and insight. I will take it all into thought we finding a perfect 80 series. This is the reason I love forums like these! I will make sure to post photos along the way of the progress when I get it started! Most photos on Instagram, like below. Again really appreciate it and I will be asking a ton more questions!
Instagram - Tuck Graham (@_tg____) • Instagram photos and videos

Liked your pic. I used to ski Steamboat a lot when I lived in Cheyenne, 1975-1984. Loved running the powder in the chutes at the top. IIRC it was kinda like 2 or 3 marrow, steep halfpipes? Don’t remember the names of those runs....
 
Back
Top Bottom