if anyone has his number and could send it my way, i'm trying to get a hold of him!
80 Series General Tech and Classifieds
- Thread starter MEMCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Did you happen to look at it Chris?
Yes. He put a lift on it, tires etc.. Seemed in good condition.
Looking for a stock 80 front bumper
My '94 80 was in an accident this week; impact from a lady driving on the wrong side of the road. While it looks to be mostly sheet metal for me and her insurance has taken liability, I'm gearing up for the argument when they want to likely scrap the truck for it's age. I'd looking for a good price on a stock front bumper that someone my still have from installing aftermarket - could use leads on used headlight assembly [drivers] and any other front section external parts also. I'm searching the more popular used parts sites specific to Cruisers, but thought I'd check w/ yall as well. Any leads appreciated
Dow Welch 662-549-6203
My '94 80 was in an accident this week; impact from a lady driving on the wrong side of the road. While it looks to be mostly sheet metal for me and her insurance has taken liability, I'm gearing up for the argument when they want to likely scrap the truck for it's age. I'd looking for a good price on a stock front bumper that someone my still have from installing aftermarket - could use leads on used headlight assembly [drivers] and any other front section external parts also. I'm searching the more popular used parts sites specific to Cruisers, but thought I'd check w/ yall as well. Any leads appreciated
Dow Welch 662-549-6203
$5k for a factory locked 40th Anniversary. Looks pretty clean too.
https://forum.ih8mud.com/threads/anyone-interested-in-buying-a-fj-80.821300/
https://forum.ih8mud.com/threads/anyone-interested-in-buying-a-fj-80.821300/
Nice find.
- Thread starter
- #2,950
crap
Go away, RZR Boy!!!
Rob - enquiring minds want to know - how'd you get that rear axle shaft out? Does the housing really have to be cut?
Can you pull the loose axle and knock it out from that side?
Last I heard they were gonna unbolt the shaft, slide it out as far as it would go, wrap a strap around it, and rip it out with a RZR...I sure hope I didn't miss that!!!
Have not tackled it yet. Have some projects that need to be finished before I worry about my own junk. If we use the rzr I will video it.
Twisted the splines on the passenger rear axle shaft between the side gear and the lock actuator collar. Seems like an easy fix but the twisted splines will not pull through the collar so without being able to remove the axle you cannot remove the 3rd. Will post up removal process when I start to tear it down.
If you take the locker actuator off, you can get in there and pull the collar off and slide the shaft out--if it is not too twisted and you can turn the shaft a bit as it is coming out of the side gear.
