80 Series Factory Bumper Swing Out DIY Kits (7 Viewers)

[Tapage]

It is a Monroe 901480.

thanks .. it came with the brackets you use ..?

 

[SUMMIT CRUISERS Jr]

thanks .. it came with the brackets you use ..?

It does not include any mounting hardware. I make the piece that holds it to the vehicle and source the bracket that mounts to the swing out arm.

 

[David Fisher]

I am interested in one of these. It will fit the 1996 LX450, correct?

 

[SUMMIT CRUISERS Jr]

I am interested in one of these. It will fit the 1996 LX450, correct?

It should, but I am not aware of any LX450 owners who have purchased one. It should not be much different other than the LC version apart from some extra drilling/trimming due to the LX450 having a different bumper shape and trim pieces over the crossmember. It would require trimming the piece that covers the crossmember to allow room for the latch plate to bolt down and the stop pad to bolt down.

Let me know if you have any more questions. I'd be happy to answer them to the best of my knowledge.

 

[HEGS]

Hi, SUMMIT CRUISERS Jr.

I need one for my 1993 Land Cruiser. Tire size 315/75/16. Right side (passenger side). Thanks. Let me know if you have any available.

 

[SUMMIT CRUISERS Jr]

Hi, SUMMIT CRUISERS Jr.

I need one for my 1993 Land Cruiser. Tire size 315/75/16. Right side (passenger side). Thanks. Let me know if you have any available.

Currently all swing outs are sold out. I will update this thread when more become available.

 

[halljames10]

I am in for one of these when you have more ready. 91 fj80 35x12.5x15 Driver side swing out.

Thanks
James

 

[HEGS]

Currently all swing outs are sold out. I will update this thread when more become available.

Thanks. Please let me know when it will be available!!!

 

[waskillywabbit]

Installed on a local FZJ80
Solid kit.

Two

• waskillywabbit
• Dec 15, 2016

Tons of pics on album on my FaceBook page

 

[Shanle929]

Great kit, doesn't shake or make noise. Amazing customer service! Thank you Summit Cruisers Jr!

 

[onsse]

Heres mine. thx Garrett

 

[madisonr34]

I need one. Drivers side for my 1997 LX450. Plz let me know when they are available. Thanks.

 

[Jim Bohlander]

I would like to do two! Your standard kit with passenger side spare mount, then would it be possible to do a kit without the vertical for the spare? I'd like to fab up a ladder with a hi-lift mount for the drivers side. Would you be willing to do and what would be your price for the kit minus the spare tire mount (with just the horizontal piece from the spindle to the latch in the center)? Thank you so much! I was planning to fab up something myself but your kit is almost exactly what I had planned and from the feedback it looks to be very well thought out, and would be a great jump start to what I'm trying to do. Thanks!

 

[SUMMIT CRUISERS Jr]

I need one. Drivers side for my 1997 LX450. Plz let me know when they are available. Thanks.

I'll definitely update this thread when I have a batch available. I have not done one for a LX450 nor do I think anyone else has so far, but I believe it will need extra trimming on the rear crossmember corner to allow the latch plate to bolt up.

I would like to do two! Your standard kit with passenger side spare mount, then would it be possible to do a kit without the vertical for the spare? I'd like to fab up a ladder with a hi-lift mount for the drivers side. Would you be willing to do and what would be your price for the kit minus the spare tire mount (with just the horizontal piece from the spindle to the latch in the center)? Thank you so much! I was planning to fab up something myself but your kit is almost exactly what I had planned and from the feedback it looks to be very well thought out, and would be a great jump start to what I'm trying to do. Thanks!

Yes that sounds great. I can sell a bare arm kit which will be $50-75 less than the tire kit. I am not sure how much less until I start ordering the materials. I do not have any swing outs available currently, but once I finish up some other projects I will be starting another batch. That will likely be sometime this spring if my classes aren't too demanding this semester.

Thanks for the interest you guys! I will update when more are available. My next batch will be my largest yet and I am hoping I will be able to have enough to keep some as stock so they can be more readily available.

 

[Jim Bohlander]

Thanks for the quick reply, that sounds fantastic. I'm not in a huge hurry, I'll be out of the country most of February, I'll send you a deposit when I get back.

 

[LandCruiserPhil]

Nice clean set up with no departure angle compromised, a big plus.

What is the 2017 price and availability?

 

[SUMMIT CRUISERS Jr]

Nice clean set up with no departure angle compromised, a big plus.

What is the 2017 price and availability?

Price remains the same at $450 + shipping. Depending on my classes this semester I am hoping to get a batch going soon or I will be doing a large batch over the summer and trying to keep a stock of them.

 

[medman]

I saw one on a FZJ80 today at Yotamasters in Corona today. I need and want one of these, please let me know when I and how I can get one. Thanks Dave

 

[medman]

Great kit, doesn't shake or make noise. Amazing customer service! Thank you Summit Cruisers Jr!

View attachment 1371276

Thanks for letting me look at your mount today at Yotamasters, looks great!!!

 

[SUMMIT CRUISERS Jr]

I saw one on a FZJ80 today at Yotamasters in Corona today. I need and want one of these, please let me know when I and how I can get one. Thanks Dave

I will be starting kits at the end of this semester and should have some ready in May. My semester is a lot busier and demanding than I anticipated and I will not have time until it is over.