80 Series Factory Bumper Swing Out DIY Kits (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

deltapine1 said:
Do you still have me on your list?
Click to expand...

Yes I still have you on my notification list, but I won't be starting a batch until this semester is over.
 
Apologies if this has been asked before... Do you think this is strong enough to hold a very heavy 37” XZL tyre?
 
bug616 said:
Apologies if this has been asked before... Do you think this is strong enough to hold a very heavy 37” XZL tyre?
Click to expand...

How heavy is the tire/wheel combo?
 
bug616 said:
About 55kg or 120lbs
Click to expand...

Shouldn't be a problem. My wheel/tire combo is 100 pounds. The only thing to be mindful of is opening it so it doesn't swing open uncontrolled.
 
SUMMIT CRUISERS Jr said:
I'll definitely update this thread when I have a batch available. I have not done one for a LX450 nor do I think anyone else has so far, but I believe it will need extra trimming on the rear crossmember corner to allow the latch plate to bolt up.



Yes that sounds great. I can sell a bare arm kit which will be $50-75 less than the tire kit. I am not sure how much less until I start ordering the materials. I do not have any swing outs available currently, but once I finish up some other projects I will be starting another batch. That will likely be sometime this spring if my classes aren't too demanding this semester.

Thanks for the interest you guys! I will update when more are available. My next batch will be my largest yet and I am hoping I will be able to have enough to keep some as stock so they can be more readily available.
Click to expand...

Hi Again, I'm ready to order the two kits I messaged you about back in January, passenger side swing out mount for 315 tire, and a bare arm kit for the driver's side that I am going to fab up a ladder with a hi-lift mount to attach to the bare arm. Please let me know how to contact you to send you a deposit, thank you! Happy Thanksgiving! Jim B
 
Jim Bohlander said:
Hi Again, I'm ready to order the two kits I messaged you about back in January, passenger side swing out mount for 315 tire, and a bare arm kit for the driver's side that I am going to fab up a ladder with a hi-lift mount to attach to the bare arm. Please let me know how to contact you to send you a deposit, thank you! Happy Thanksgiving! Jim B
Click to expand...

Sorry, but none are available at the moment and I am not accepting deposits yet. I will be starting the next back within the next month once I'm done with classes.
 
94LC00X said:
Do you know when the next batch will be coming out? Also how much to ship to 28806?
Click to expand...

I will be starting the batch here once I am done with finals next week. It should be available sometime in January. Shipping to 28806 is $70.
 
LetsGoBack said:
interested in the receiver relocation. is that something you offer or just a custom piece you did yourself? any writeup on it?

good luck on finals!
Click to expand...

Thanks! There are several reasons I don't offer the receiver relocations as part of the kits. No write up on it, but I am planning to cut out my crossmember and redo it in a much stronger way as my bike rack bouncing up and down has taken a toll on it.
 
You must log in or register to reply here.

Similar threads

T4rod
80 Series DIY front bumpers and other products
Replies
0
Views
863
T4rod
T4rod
raisinhell2
80 series 1 FZ-FE catch can system ..
Replies
0
Views
478
raisinhell2
raisinhell2
springerVXR
3D SCANS . 3D MODELS . DRAWINGS . Land Cruiser 80
Replies
10
Views
1K
springerVXR
springerVXR
RuggedOverland
80 Series Repair Manual - Limited Time Discount from Rugged Overland
Replies
1
Views
1K
RuggedOverland
RuggedOverland

Users who are viewing this thread

Total: 4 (members: 0, guests: 4)

Share this page

Back
Top Bottom