55.... bob it or run it??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 18, 2005
Threads
30
Messages
166
hey guys, i have a 76 FJ55 thats pretty rusted... roof is almost shot, rear rockers are almost shot...

ill post pics in a little bit

what would you do? i hit the ass end of this pig on EVERYTHING

should i just suck it up, build huge bumpers and call it a day?? my GF is buying a bender for me for Christmas, i just gotta order it..:grinpimp:

the roof is pretty bad, but with a roll cage i wouldnt be worried anymore....

i was thinkin, with out actually measuring it, i could do about 12-14 inches.

but what about my rusted top? i dont think i could weld it back up.....

ill post pics in a while
 
I wheel mine. The rear end gets smacked, for sure. I've been able to keep the spare tire in the stock location. It helps cushion the blow once in a while. :D I've smacked the lower edge of the rear quarters since this photo, but not too bad.
Small Attention Getter.webp
 
Gumby said:
. Learn to wheel a long rig, or bob it.

I'm letting the trails decide. I've caved in one corner pretty good already. :D

i can drive a long rig... actually i kinda prefer it.. thats why i'm sellin my 40....i like the longer wheelbase, but not the departure angles.. i fallow '40's and mini's around....

i like to take my GF and friends... my little bro likes it too....

i also like to carry a lot of tools and "junk"

i've caved in the rear corners and about trashed the stock rear bumper:)
 
pygpen said:
It's difficult to tell in this photo, but this 55 is bobbed.
DSC03121.sized.jpg

I have a little information on it, but not much. It also has an FJ40 dash panel IIRC.
PMK

that thing is bad ass:grinpimp:

i've seen a few pics of it, thats what got me thinkin..

anymore info on the dash?? my 55 dash is cracked and terrible looking...

how much was taken out of the body?? any issues with the tailgate or cargo windows??
 
whats that handle lookin thing on the back above the tail light??

i kinda dig it... it's cool.. any idea how much was taken out???

did the owner say anything about it?? like it, hate it, that sort a thing??
 
IIRC, and I may not...... The curent owner is a former TLCA pres, I do not recall his name. He did not do the bob. The bob was done by the PO, John Langdon. They both show up for every Rubithon I've been to. Johns rig is a stretched 40, go figure.....
Not sure what that thing on the back is, my guesse is an antenna.....
PMK
Fullsizeyota said:
whats that handle lookin thing on the back above the tail light??

i kinda dig it... it's cool.. any idea how much was taken out???

did the owner say anything about it?? like it, hate it, that sort a thing??
 
i havn't done it yet but this is my plan:
cut the rear rockers and the bit ofsheetmetal under the tailgate off and replace with 2x4x1/4" tube (kinda a "u" shape wheelwell to wheelwell) just like many peoples sliders. then cut the frame and bumper off shortand re-box. the rear body mount will have to extend back as oposed to sideways.
with my 4" lift and 31's should bring my rear departure angle to ~45*, or closer to 60* when i can aford to stuff 37's under there.
just a thought for now but i hope to have it done before swine-o-rama.
do what works for you, i wanted to keep my interior space.
-carl
 
The PO of my 55, Royal Rose, cut the frame right behind the rear shackle mounts and moved the rear bumper up about 2". The drag factor between this truck and my other 55 is quite noticeable.

Here's more pictures of the bobbed 55 from Morgan's website:

bob55-2.jpg


bob55-1.jpg
 
fng55 said:
i havn't done it yet but this is my plan:
cut the rear rockers and the bit ofsheetmetal under the tailgate off and replace with 2x4x1/4" tube (kinda a "u" shape wheelwell to wheelwell) just like many peoples sliders. then cut the frame and bumper off shortand re-box. the rear body mount will have to extend back as oposed to sideways.
with my 4" lift and 31's should bring my rear departure angle to ~45*, or closer to 60* when i can aford to stuff 37's under there.
just a thought for now but i hope to have it done before swine-o-rama.
do what works for you, i wanted to keep my interior space.
-carl

1/4 is pretty much overkill. I've regretted building my first set of sliders out of .25. 1/8 is plenty for 2x4 rec tube.
 
i cut my back of right at about half a foot from the rear doors and its real nice email me at scife@msn.com i will show you some pics its really nice and then you make a bed in the rear
 
so many choices....

i cant decide what i wanna do....

really, i should sell my 55, go back to the 40 project i have had for 2 years, after all it's pretty much done, just a few stupid things, buy a bender make a cage and some getto tube fender flares and be happy....

i love the pig, hate that fact the top doesn't come off (i know sawzall fixes all)

hate the over hang...


@&@&@&@&....
 
Back
Top Bottom