40 series general tech and classifieds

[FJ60Cam]

I could hand walk the DUI over to Performance to be converted.

 

[fountainhead]

Looking for a 40 hood and grill/bezel...they don't have to be from the same year or same truck or even match. Surface rust is fine, but not looking for anything that's been eaten through.

Would prefer non-split hood and round bezel...so something post '71 ish on the hood and pre '79 ish on the grill/bezel.

Thanks!
JT

 

[dnp]

Pretty much just a drivetrain refresh. The 1f runs and has good compression but leaks from every seal. It has a Weber 32/36 on it and want to swap back to Aisin carb. I would like to swap in later model axles to get disc brakes and the fine spline shafts so I can re-gear possibly. Lastly I want power steering.

My 62 axles wouldn't work for this application, right?

 

[wngrog]

My 62 axles wouldn't work for this application, right?

No. Perches are outboarded.

 

[wngrog]

CCOT sells bezels. Cheap.

 

[Bossman]

My 62 axles wouldn't work for this application, right?

I think everything will work except the housing and the long side inner. What year is the 40 again?

 

[Fireman]

I've a disc brake axle but l'm in Texas.

 

[alabamatacomaguy]

CCOT sells bezels. Cheap.

dont let the secret out....I keep meaning to order one and putting it off until I need something from them.

I just went and looked they also have a repro bibb, not cheap but nice to see its avail.

 

[wngrog]

Volume is good. The more they sell the more likely they will keep em coming

 

[Bodean]

Looking for a 40 hood and grill/bezel...they don't have to be from the same year or same truck or even match. Surface rust is fine, but not looking for anything that's been eaten through.

Would prefer non-split hood and round bezel...so something post '71 ish on the hood and pre '79 ish on the grill/bezel.

Thanks!
JT

@Texican might have what you need.

 

[dnp]

I know most of us are aware of what these guys are producing, but here's an interesting article on their newest offering. Better go ahead and get on the waiting list now and avoid the rush:

FJ Company's Meticulously Restored Toyotas Impress at SEMA - Off-Road.com Blog

 

[JTU]

I know most of us are aware of what these guys are producing, but here's an interesting article on their newest offering. Better go ahead and get on the waiting list now and avoid the rush:

FJ Company's Meticulously Restored Toyotas Impress at SEMA - Off-Road.com Blog

Let me whip $200k out real quick for that. Better yet, Precision Delta’s new company ride.

 

[ntsaint]

Wonder if they will take a check...?

 

[wngrog]

That truck appeals to me absolutely zero. While I appreciate well done custom work that is just silly.

I’d rather have 20 $10,000 Cruisers

 

[dnp]

That truck appeals to me absolutely zero. While I appreciate well done custom work that is just silly.

I’d rather have 20 $10,000 Cruisers

^^^THIS!!!!!!!!!!!

 

[Fireman]

They had one at the premier of the Expedition Overland series in Dallas that was powered by a 1FZFE and it was NICE! they workmanship was there and the detail was great.

 

[wct49]

I know most of us are aware of what these guys are producing, but here's an interesting article on their newest offering. Better go ahead and get on the waiting list now and avoid the rush:

FJ Company's Meticulously Restored Toyotas Impress at SEMA - Off-Road.com Blog

NO. EFFIN. WAY.

 

[jrob]

I have got to get on MUD more often!

 

[jrob]

Just wanted to put this here first. I have the 2f that came out of my truck when we did the motor swap. The motor was weak but running fine at that time. The compression across all cylinders were between 110 - 115 lbs. If anyone wants it give me a call $ 500.00 obo

 

[MScruiser]

Just wanted to put this here first. I have the 2f that came out of my truck when we did the motor swap. The motor was weak but running fine at that time. The compression across all cylinders were between 110 - 115 lbs. If anyone wants it give me a call $ 500.00 obo

What year did it come out of? Had it been desmogged? Factory carb and air cleaner?