Looks stout. Where did you need to drill the 3 holes for fitment for the sliders?
Media 300 Series Picture Thread
- Thread starter prwillard2
- Start date
Photo/Video/Audio threads
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Which size caprock did you go with?
Front wheels look Toe out. Have you gotten an alignment yet for the sensor lift?
You're seeing the positive chamber since the truck is in H2. I drive in normal 90% of the time, so no alignment issues with the height offset.
Im in H1 and feel it rides better there. Debating if I should sensor lift and keep in H2. Wondering if an alignment would be enough to correct the positive
Camber.
You may have to install upper controls to fully dial out the chamber if you max out the sensor lift.
For clarification, my truck has an offset adjustment through techstream. I have not adjusted my physical sensors at this time.
Had to replace the lame Thule T2 Pro XT with the cool kid Quikrstuff Mach 2.
Looks a lot like a OneUp. I’m surprised they didn’t run into any patent issues. (Unless they’re aren’t any)
hah, so I think there's a long story, and every story has two sides.
It's the same designer as 1up but he and 1up separated ways with a bit of drama. The quikrstuff rack has some nice quality of life improvements:
You can get everything keyed alike even if you don't order them at the same time
Tool-less expansion to add bike trays or to store the ramp attachment
the trays fold in half to make storage and transport off the vehicle easier
better release for angle adjustment vs 1up
better hitch lock
Aside from the drama christsay mentioned, the patient actually expired which is why Rocky Mounts and other manufacturers have released designs copying this style of rack.
I have the 1UP Equip'd myself, but have been looking at the QuikR stuff as well.
New to the forum. Just got this back from PPF. Will be doing ceramic coating and installing spacers on the factory wheels while I’m waiting for build components arrive. I recognize my build may not be very popular in this forum but I am enjoying this vehicle so far and all of the work/projects that you are all doing. Cheers. David
Welcome to the 300 series party. Glad to have you. What spacers did you order?
She is a looker. Curious why would you pick a 600, as opposed to a 700h? Assume you needed a decent third row?
Hi. So I bought KSP 30mm spacers from rhdjapan.com. I thought they were going to be too wide for the stock fender, so I also bought the spidertrax 1inch (25mm). I ended up keeping the KSP’s on and now have the spidertrax on the shelf.
Thanks for the warm welcome!Bring it in homiethis place awesome.
I really bought this car to have as a daily driver. I enjoyed the luxury feel vs the GX (which i think looks excellent) but it was a little plasticy for my taste. I also wanted more rear space for hauling stuff and general things. I don’t need the third row really so I liked the lower rear interior deck I think.