2F Heritage!??!?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 8, 2004
Threads
49
Messages
248
Location
Bonita, Tx
Recently got into an argument with a friend who claims that the trusty F engines that power our cruisers were designed and built by GM! Please say it ain't so!!
Not that I hate to loose an argument, I just hate to think that my 40 has some GM blood flowing through its veins!!! :eek:
 
The article I read in 4x4 magazine a couple months back said toyotas engine was a reverse engineered chevy. Toyota's founder was originally a textile manufacturer or something of that nature. And when he wanted to start building cars so he did that to get the engine for his vehicles. Someone may correct that if I recalled the facts wrong.
 
There are too many similarities to say it ain't so. Chevy 225/250 six have waaaaay too much in common. Remember we were trying to rebuild their economy.

It is...a Japanese copy of the GM motor. And as Martha would say "It's a good thing"
Sorry to disappoint you.

Ed
 
This has been rumored (reported) to be the case practically forever...and I've believed it for just as long. I've never believed, though, that my 2Fs are Chevy motors - they're Toyota 2Fs that last a lot longer! :D
 
MG0762 said:
I just hate to think that my 40 has some GM blood flowing through its veins!!! :eek:



What is your specific issue with the fact that it is a copy of a GM engine?



Have a beer and calm down man.....
 
I'm actaully drinking scotch and am calm. :cheers:

Don't have a problem with it being a knock off. Was trying to find
out if GM had any involvement with production.
 
I cannot remember if the main bearings on the 225/250 Chev engines are shimmed like the earlier F engines...


There are some very different thigns about them, but there are some similarities beyond the I6 construction...



:beer:


-Steve
 
Toyota may have "copied" GM, but I console myself by knowing they did it better... :D
 
Nothing wrong with copying someone else's homework, long as you know it's reliable, and it's in your own hand writing!! ............Glenlivet makes me get philosophical sometimes.
 
There is nothing wrong with taking someone's idea and improving on it.



"We don't make the paint...we just make the paint better"....BASF



Hell, if GM wasn't involved, all the Cruisers might have ItchyPussies(Mitsubishi)
in them!
 
Toyota probably did reverse engineer it, but that probably occurred in the 50s. Since then Toyota took the design and made their own improvements. An 80 GM I-6 probably has some glaring differences from an 80s 2F. An early 60s F135 however probably has a number of similiarities with a similiar vintage GM.

But its not like Toyota reverse engineered it in 83 or whatever.

And the design has worked well, so who cares if its GM...

Not sure if GM licensed though, or if Toyota just took it. Given the size of Toyota Motor Corp at the time, would GM even notice a copy with only a few thousand imports?
 
I was also always under the impression that toyota originally copied general motors. However, Even though gm made a decent straight six, expecially for the time, the reliability isn't the same as toyota. Really not a big deal since toyota has diverged so much upon their original design. Ever see a chevy run for 300000 miles on the same engine? The answer is likely no.
 
IIRC Toyots originally copied the Chevy 235 when we were helping them put the country back together. The question is was it with or without the permission of GM. CONsidering our occupation of their country at the time I would assume that it was with permission. They used the engine in thier heavy truck line and moved it over to the Cruiser later on. I can't document any of this, but that's how I remember it being explained in discussions.

The lifters and the cam bearing remained interchangable up until the 3FE. The cam bearings remained the same even through that evolution.

Mark...

Mark...
 
I've got a professor who studied the Japanese automotive industry for his doctorate.

His explanation was that after the war, Japan made a law similar to Brazil's, that any vehicle sold in the country had to be built in the country. The major USA manufacturers (notably GM) shipped all the parts over there, and the Japanese companies got their start by assembling everything.

It slowly diverged from there.

Edit: The government there also really regulated the automotive industry. They did that up until Honda managed to get around the restrictions and succeed despite their best efforts.
 
I think it maybe a simple copy and improove deal. Coming from a hard core GM ( two gm dealerships at one time) family. It looks like a stove bolt, but it sure last longer. I have seen both get equal ambuse and maintainance, Toy still runs.enough said.
 
clemson55 said:
Toyota's founder was originally a textile manufacturer or something of that nature. And when he wanted to start building cars so he did that to get the engine for his vehicles. Someone may correct that if I recalled the facts wrong.

Here is what I read and wrote:
http://www.steelnthings.com/toyoda/sakichi.html

Sakichi was the father of Kiichiro who designed the AA
 
supposedly, patents were sold by gm to toyoda motor works...it's rumored that it was a government push to help relations between the two countries. japan is well known for taking good ideas and improving them.
 
chevy valvetrain is way different

rockerarm studs vs. toyota rockers on a shaft pressurized with oil to lube all the rockers

also I think the toyota has solid lifters and pushrods

and the chev uses hydraulic lifters and hollow pushrod to deliver the oil to the top end


just that feature of the toyota motor makes it last alot longer


all toyota motors are made by toyota ( i think)
 
Chevy 235 uses solid lifters. You can interchange them with the 2F. I've done it, and encountered engines where someone else has.
No reason to swap them, but it can be done.


Mark...
 
Back
Top Bottom