Every Kenda I’ve had and have seen balanced needed 2 oz or less per wheel. This is from 275/70/18 to 35x10.5x17 and anything around that.
200 Series Tire and Wheel Size Database
- Thread starter MScruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Copy... definitely have some 60mph+ vibrations, and going to start with remounting and rebalancing the tires... hoping that's the culprit.
Any issues fitting 18 x 9.5, 12 offset, 275/65/18. On bone stock? My only concern would be the 12mm offset as 25-35 seem to be sweet spot limit. I’m thinking shouldn’t be an issue if some are running 1.5” spacers. Not looking to do any wheel well mods. Thanks for feedback
Actually 48mm or 1.88" (60-12)
siberian
siberian
That would be true if he were using the same width wheels as stock. He mentioned 9.5” wide, so they’ll push out even further.
Actually:
The tire will stick out 43mm farther. Rim will stick out 67mm farther.
But I would be more concerned about the increased positive scrub radius.
I would not recommend this setup.
HTH
My bad, I didn't remember the rim width... 
siberian
siberian
Thanks But I’d be going down 10mm with a 275.
Thanks! But I really want those black Rhino Chamber wheels!!
What the heart wants...
siberian
siberian
It’s not very exciting but my wife’s 21s just got new 275/55r21 tires. I found some 20s to swap onto it but she likes her bling. The step up in sidewall really did make a huge difference though. I’ll try to get a pic tomorrow. No one ever talks about this size as an option,
Guess it depends who you ask
Either way, I’m in complete agreement with you that this would be a bad idea.
Guess it depends who you ask
View attachment 4085989
Either way, I’m in complete agreement with you that this would be a bad idea.
I see - you differentiating between tire and rim poke. Sort of inconsequential given the scrub radius as you mentioned
I must be dumb, cause I cannot find the dang database anywhere on the first page or anywhere in this post,,,,,,,
Post in thread '200 Series Tire and Wheel Size Database'
200 Series Tire and Wheel Size Database - https://forum.ih8mud.com/threads/200-series-tire-and-wheel-size-database.818686/post-15980684
New to me '13 LC with RW Wheels I found over the weekend, 285/70/17s on stock height.
Fantastic thank you!! Mods can you sticky this to first page??
Hey guys, I’m running BFG K03 LT275/65R18 Load Range E on 18x8.5 Method MR318 +40mm. Any one know what is the correct tire pressure I should be running? @gaijin
Assuming you are putting these on a LC200?
If so, the RCTIP for those LT275/65R18 tires on your LC200 is 44psi F/R
HTH