I only asked for six.
Build 1969 FJ40 Father / Son Build
- Thread starter royal cake
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #122
Of course! You got it.I only asked for six.
- Thread starter
- #123
Continued to strip the tub today to get it ready for body work. It’s unreal how many wires were twisted together with tape, not even a connector. I wonder if I caught a glimpse of the original paint as well?
Your making good progress 
- Thread starter
- #126
Continuing to strip the tub; check out the treasures in the vent!
- Thread starter
- #127
Ask had a question; what’s this guy mounted to the firewall, passenger side near where the heater hoses pass through?
firemanj92
SILVER Star
what's left of the plug for underhood/service light
- Thread starter
- #129
Ahhhh interesting. Thanks!
The early style one are getting harder to find, the newer style are still available from Toyota.
- Thread starter
- #131
Well now that’s nifty! I’ll definitely have to get that working again.
- Thread starter
- #132
Work seems to be getting in the way of real progress! But I’m starting to get back on the horse. Slowly welding up aftermarket holes around the body. Hopefully I’m not plugging something that’s supposed to be there!
Only the largest holes, just below the top of the drip rail are stock. FST twists go in those.
- Thread starter
- #134
Thanks Mark. There are so many holes in that thing it's hard to tell what's going on.
If you can fit a 6mm bolt through it, but not an 8, you should probably leave it.
Nice seeing you Saturday in Bakersfield.
- Thread starter
- #136
Yeah for sure - I was going to mention; always fun at the meet. Was able to sell my overdrive stuff too, so it was a good trip. Hope your back heals up!
- Thread starter
- #137
Work is going slower, but I’m still alive. Continue to weld up small holes.
- Thread starter
- #138
Body is out to be taken down to bare metal, then off to the body shop. Big day!
- Thread starter
- #140
I even told the shop I never meant for it to go this far…