Maybe the coaster idea with a finger hole in the middle so you can easily lift it out
100 Series Cupholders, Dome Lights, RAM Mounts & More - Cruiser Design & Manufacturing
- Thread starter CruiserDM
- Start date
-
- Tags
- 100 series 3d 3d printing cupholder
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
CruiserDM
Supporting Vendor
- Thread starter
- #183
Apologies for the lack of communication on here lately, I've been fighting to catch up on orders and I've finally worked up some breathing room.
My tests thus far with resin to smooth out the texture on my trim indicators thus far have been unsuccessful. Can't seem to get a nice smooth consistent surface on top, although I haven't had a ton of time to play with it if I'm being honest.
Going to try and get a new product out this month. Had plenty of interest regarding the third row vent replacements so that seems like the obvious next contender - also have a mount for the Scangauge 2 almost complete that allows you to actually screw the scangauge to it, rather than depending on velcro or adhesive strips to hold the thing still.
My tests thus far with resin to smooth out the texture on my trim indicators thus far have been unsuccessful. Can't seem to get a nice smooth consistent surface on top, although I haven't had a ton of time to play with it if I'm being honest.
Going to try and get a new product out this month. Had plenty of interest regarding the third row vent replacements so that seems like the obvious next contender - also have a mount for the Scangauge 2 almost complete that allows you to actually screw the scangauge to it, rather than depending on velcro or adhesive strips to hold the thing still.
CruiserDM
Supporting Vendor
- Thread starter
- #184
Not sure how much love this one will get but I've never had a great place to put my phone while driving and was never in love with the windshield mount I had. I also run a carplay receiver so don't need to see the phone much while driving.
I came up with this ashtray mount, it's two pieces, one that mounts to the ashtray position and another is the actual phone shelf. This makes it super firm and a really tight install, going to use this base for more switch panel, scangauge, etc. mounts in the future. Check it out here: Ashtray Mount Cell Phone Holder - https://cruiserdm.com/products/ashtray-mount-cell-phone-holder
This tray does replace the original ashtray and blocks the cigarette lighter from being used.
Also, our Black Friday sale starts now! Code BF2022 gets 20% off everything in store.
I came up with this ashtray mount, it's two pieces, one that mounts to the ashtray position and another is the actual phone shelf. This makes it super firm and a really tight install, going to use this base for more switch panel, scangauge, etc. mounts in the future. Check it out here: Ashtray Mount Cell Phone Holder - https://cruiserdm.com/products/ashtray-mount-cell-phone-holder
This tray does replace the original ashtray and blocks the cigarette lighter from being used.
Also, our Black Friday sale starts now! Code BF2022 gets 20% off everything in store.
If you could incorporate a wireless charger in it too...
CruiserDM
Supporting Vendor
- Thread starter
- #186
What a great idea! I could definitely incorporate a slot for a magsafe charger for apple iphones that support that, the magnet would work perfect. In my experience with android and regular wireless chargers I'm not confident it'd work if the phone was laying on it at an angle/standing up in the slot.
YezusLX
SILVER Star
Maybe this would help? I use the Scosche magic mount MagSafe wireless. This would be perfect for it since it will help hide the ugly 12V socket and wire as well if you do not want to take it apart and hardwire. Currently mounted on my ORS console job. Gets in the way of mags and pew-pew sticks. would be nice to relocate to the center.
www.scosche.com
MagicMount™ Pro Charge5 Dash/Vent
MagSafe® Compatible Magnetic Wireless Charging Phone Mount
www.scosche.com
CruiserDM
Supporting Vendor
- Thread starter
- #189
Added a listing for some ICON wheel cap spacers for those running ICON wheels, and willing to make wheel cap spacers for any folks running Method, RRW wheels, etc. Just shoot me a message and I'll set up a label for you to ship me your original wheel cap to model after.
Mmmmm tempting ...I need that functionality but don't like the way it looks. I wish there was a way this could be removed when not needed and the stock lid could be retained . It like to close it all up and give a cleaner look.
PS - assuming that's a big piece of tape of something ? If so nice seat fix , dude just dgaf
This LC is no showpiece. Beat when I got it, gave it to a cousin for 3 years, and more beat when I got it back. Yes…this guy dgaf
CruiserDM
Supporting Vendor
- Thread starter
- #193
My LX is the exact same way. Had to stop caring about the minute details somewhere along the way. Glad you like the cupholders!!! Feel free to reach out if you ever need anything.This LC is no showpiece. Beat when I got it, gave it to a cousin for 3 years, and more beat when I got it back. Yes…this guy dgaf
I love mine. I think that door is silly. Want mine?
CruiserDM
Supporting Vendor
- Thread starter
- #195
Just wanted to thank everyone who’s ordered from me at cruiserdm.com in the past few weeks for putting up with the long lead times, we’re finally caught up and cupholders along with most other products are sitting right at ~2-3 days to ship.
We are also now a dealer for Baja Designs, I’ve used their lights for a few years now and I believe they’re the best out there with a warranty to match, and a perfect fit for the most well built trucks on the road.
@joseph.esss 's beautfiul truck with LP9's up front
Their products are available on my site now, and if you’re looking for a specific kit please reach out and I’ll let you know the best price I can do.
I work full time as a professional control systems engineer as my day job and am experienced with low voltage systems, with that being said I’d be happy to help with any questions you may have when trying to design an accessory system for your truck (Lights, winch, 2nd Battery etc.)
I’m also more than willing to help customers with any wiring questions and provide basic schematics/wiring diagrams to make the process a bit less intimidating. Custom light mounts coming soon (see 80 series dome switch panel prototype attached as an example)
We are also now a dealer for Baja Designs, I’ve used their lights for a few years now and I believe they’re the best out there with a warranty to match, and a perfect fit for the most well built trucks on the road.
@joseph.esss 's beautfiul truck with LP9's up front
Their products are available on my site now, and if you’re looking for a specific kit please reach out and I’ll let you know the best price I can do.
I work full time as a professional control systems engineer as my day job and am experienced with low voltage systems, with that being said I’d be happy to help with any questions you may have when trying to design an accessory system for your truck (Lights, winch, 2nd Battery etc.)
I’m also more than willing to help customers with any wiring questions and provide basic schematics/wiring diagrams to make the process a bit less intimidating. Custom light mounts coming soon (see 80 series dome switch panel prototype attached as an example)
Good evening. Checking back with you after a couple of months. Were you ever able to fabricate a "smooth" shift indicator plate for the 100 Series? Thx!
Thx for the quick response. I'll hang in there with you. Keep up the great work.
CruiserDM
Supporting Vendor
- Thread starter
- #199
Probably my most long-awaited design by far. Third Row Vent Redirects. This allows those of you with functioning rear A/C to redirect that air back to your 2nd row to cool off your kids, dogs, wife, etc.
This was a tricky design because the original vent assembly screws together from the back of the headliner. With that being said, once you rip the old one out you probably aren't getting it back in without dropping the headliner so take note of that before ordering. This design has you remove the old vent, slide in two nut plates right behind the headliner, then bolt up the panel shown below.
The redirect vent then bolts on to that piece, redirecting the air back to the 2nd row.
Discrete block off plates will also be available for those of you who have disconnected your rear a/c lines.
Pre-Order is now live, with the first kits being shipped May 15th at the latest. All stainless steel hardware included. Install video coming soon. These will be available in Black and Tan. Finish shown on green part is not indicative of final part, surface will be clean and free of marks/defects. Still a bit of smoothing/chamfering to be done so it's a bit prettier before the design is final.
Pre-order here
The full assembly:
This was a tricky design because the original vent assembly screws together from the back of the headliner. With that being said, once you rip the old one out you probably aren't getting it back in without dropping the headliner so take note of that before ordering. This design has you remove the old vent, slide in two nut plates right behind the headliner, then bolt up the panel shown below.
The redirect vent then bolts on to that piece, redirecting the air back to the 2nd row.
Discrete block off plates will also be available for those of you who have disconnected your rear a/c lines.
Pre-Order is now live, with the first kits being shipped May 15th at the latest. All stainless steel hardware included. Install video coming soon. These will be available in Black and Tan. Finish shown on green part is not indicative of final part, surface will be clean and free of marks/defects. Still a bit of smoothing/chamfering to be done so it's a bit prettier before the design is final.
Pre-order here
The full assembly:
Thanks for working on it! Do you think a lower profile design would be possible?
