thermostat housing

So I have begun replacing parts on my cooling system starting with the radiator and all of the radiator hoses. Today I decided to take apart the thermostat housing, and to my surprise there is no thermostat. I have had no issues with my engine running cool, it typically holds 180* on long drives...

I replaced the upper thermostat housing in my FJ62 with an aftermarket housing and now am having an issue with the stock water temp switch leaking when engine gets up to temp. I read a few threads saying teflon tape is a no no, as the switch is grounded through the threads. Searching the stock...

Hello, Looking for FJ60 (1985) Top thermostat housing (isn't it the same as a late model FJ40)? Four bolt holes. Anyone have one? Need it shipped to zip code 30265 Thanks!

Redoing the plumbing on my 2FE and trying to decide which housing I'm going to run for the thermostat. I have a question about the 2F with oil cooler: In this photo, cool water is flowing FROM the water pump -> oil cooler -> thermostat upper housing, correct? I don't really get that...

Lower t stat housing with temp sensor. Front right threads have been rethreaded but still in good condition. $25 paypal fnds n fam. plus shipping .

Did a search and came up empty. Anyone know of a source for the lower thermostat housing for a B engine, 2-hole base plate? There are none that I can find in the Philippines. Thanks.

Need a good lower housing in clean condition. Thanks.

Just like the title says, i need the lower thermostat housing. I have the Jim C plug, and im getting a new BSV. But if you have it with bsv's i dont care. Ill pay for speedy fast shipping. please PM or comment. Thanks, Mason

Uppers only; no lowers available. $40 each plus the ride from Burbank. Minimum order requirements apply. No PMs please. Post or call the shop. www.marksoffroad.net

Hey guys, I replaced my water pump and timing belt a few weeks ago and I am having trouble getting a good gasket seal at the thermostat housing. (See pics). I have done the gasket twice. The first time I followed the directions on the permatex gasket maker (red). I put the material all around...