manifold

I got a big ole crack in my exhaust manifold. I have 77' FJ40 (10/76 build date) California model. According to SOR, there is a special intake/exhaust manifold just for us poor California saps. Anyone have an extra lying around they would be willing to sell?

I've known it has been there for a while, but it is time to get around to the crack in my 1977 exhaust manifold. Any way to fix something like this or do I just have to suck it up and look for another manifold? Any advice would be appreciated! Thanks, Paul

I have one of these. part # 17141-60010. Pics and details are here 40 Series, Intake/Exhaust Manifold, 17141-60010

Hello I'm to buy the rings that go into the intake manifold for a early Siamese port intake! Please let me know if you have any for sale or can recommend me somewhere!

Hey guys, 87' 22r intake manifold leaking coolant (slowly) seeping from lower section of manifold. It seems to be leaking from the gasket between manifold and plate below. What is the name of the plate it is leaking from so i can properly find the gasket needed? Also, what is a good website to...

Hi all, I have the infamous ticking sound that indicates an exhaust manifold leak. The dealer replaced the left side manifold at 125k (now have 150k), so I am thinking the right side is leaking. That said, the dealer told me last year that both sides are leaking. Three questions. 1. I have...

Does anyone know a good shop that can weld up my cracked Manifold? Also, I need it milled down as well. If you have any suggestions of a place in the Valley..Please let me know...and what should this cost me? I am new to the area and first timer on the manifold. Thanks!

Anyone know what gasket this is? Part number or where I can get it?...it is from the second exhaust/smog under the manifold Also, cannot find this one either.. anyone? For the ERG, Right? Thanks to anyone that can help!

Well, I am at that point that most of us have been....the good ol cracked intake manifold. I only had to pull off the carb and look at it... even as dirty as it was, it's pretty clear. Suspected that this might be one of the problems...along with bad gaskets, loose bolts, etc... Now I...

Looking to buy a exhaust manifold for my 1966 FJ40. If you are in California that would be great. But other states is fine!

Looking to trade new never used header for an operational later 1F exhaust manifold in good shape. I had the header sandblasted and then painted with VHT header paint. Exhaust flange included. I'll pay shipping from Akron, OH on the header, you pay shipping on the manifold.

Ok, hate to be needy here but here goes. i bought this 1976 40 because it was untouched original except original owner changed carb to holly and exhaust to header, deleting all smog. The good news is he gave me the original Aisin carb and everything else he had removed. I posted some pics. I...

i need an exhaust manifold for 1971 FJ40.

Ok, straight from the dumbass files: Cleaning EGR & modulator lines, stuck a cheap paper clip into this port - and Dammm I think a piece broke off inside this small port (driver's side, intake manifold). Tried to find another paper clip like it to determine if size matched and if truly broke...

Hey Guys, I was going to turbo my 3B but have decided to go a different direction. I have a brand new 13B-T Turbo Manifold. Toyota stopped making these years ago, but I have a contact who has been reproducing these for years to OE specs. Pretty sure it's the same manifold that all of the...

Looking for clean, functioning 1F exhaust manifold. Thanks, Jesse

'77 2f FJ40. I'm chasing down an exhaust leak. The manifold plate between the two gaskets is cracked. I've seen three different options for plate configuration. Any advice as to which one works the best? They range from OEM to a solid sheet of stainless to a peripheral rim of material...

does anyone have a .stl file of the 2F exhaust down pipe flange? I need to get one cut. TY

Hi guys I've had a look and couldn't find the info I need so apologies if this has been answered before I'm removing the plenum/throttle body and manifolds on my 3FE and can't find a gasket for between the two parts of the intake manifold. The join is pretty much in line w/ injectors. I plan on...

Bought for a project that didn't pan out. You'll need to get a new port gasket, but is otherwise in great condition. $200+shipping