linkage

Hello, I am looking for a linkage member for my 1967 FJ40. I have the original dash mounted, vacuum-assist 4wd, but the link I have, (shown below) I believe is for a 4-speed and is about 2-3” too long. I am hoping to avoid cutting this down and rewelding it to the correct size, so please let me...

Gas pedal, spring, and bracket. $60 shipped in the 48.

I'm having trouble with setting up my three on the tree it was a floor shift and am converting it back to three one the tree. I have all the linkage set up but am struggling with the slave cylinder set up with the motor mount and linkage. I have a 62 fj40 but using some later model parts. No...

Looking for a slave cylinder braket for am early fj40 f35 engine. also adapting to three on the tree linkage hope on making sense

SoCal 1-2-3-D Complete floor unit, I can provide the console as well if you would like it! $100 + shipping. Console $40

I'm not sure I have my linkage connected correctly or I have a wrong part or two. It seems like the linkage to gas pedal rod is on a pretty good angle as well as the linkage to carb rod. It seems like the ball on the gas pedal would be better aligned if it were on the other side. It's a 5/1977...

SoCal From a 1991 Toyota Land Cruiser FJ80 with A440 transmission. The whole thing including shift lever, floor piece, top plastic tunnel cover, linkage, knob. $180 with local pickup. Shipping and Paypal are available.

So, my lift has been putting the hurt on my sway bar links on the rear axle. The stock length throws off the angle and they rake forward after the geometry of the lift is applied. My threads on the top of the link stud eventually just gave way and rusted so much that it was difficult to remove...

I need the short rod that goes from the torque rod to the carb. It needs to have the attachments on opposite sides. The part is NLA. I only need that one part, but would be willing to buy a whole assembly if it isnt crazy expensive. I have some stuff to trade! Thanks.

I am looking for the long wiper linkage and the two plastic retainers that go with it (picture #1) or one plastic retainer (only need 1 round plastic retainer shown in picture #2 and I would repair my existing long wiper linkage) Jeff

Looking for these parts, and the orange pedal firewall boot as well if anyone has these:

I'm wondering what the original accelerator bracket/linkage was suppose to look like here, and if those are still available anywhere. One of the POs hacked this up and I want to get it back to stock. Thanks in advance!

Need complete except pedal. Part that mounts on firewall Linkage to pedal Linkage to carburetor Bracket that mounts to carburetor base Throttle shaft from firewall to carburetor Springs (if available) Thanks

pics and details are here 60 Series, Transfer Case Linkage, Later model

Hello from a new member here. Trying to put together a basket case fj and need some help with how the shift linkages connect. If anyone has some pictures it would be greatly appreciated

Shipped to 80503. Thanks 2f fj60

anyone have a line on the linkage and shifter to covert my under-dash transfer case lever to the hump in my '69 fj40? I'm in Portland OR.

Partial linkage and pedal from an unknown year . $75 US plus shipping. SOLD SOLD SOLD

Looking for the linkage for the cowl vent + pull knob and bracket...

Early F135 in Kentucky for Sale Including Big Window Carb (damaged at base) :frown: located in Bowling Green, KY