Added a stainless kit with correct M5 flange screws and EPDM UV stable rubber washers to fill the holes left after removing the roof rack on the 80 series.
https://www.overlandmetric.com/collections/stainless-hardware-kits/products/roof-rack-delete-18-8-a2-stainless-80-series
Dual battery kit from Delta V. I recently bought a Cruiser and this kit came with it. Previous owner had planned on installing it but never got around to it before selling. All brand new and never used. The first pic is a screenshot from Delta V website with the included parts checked in...
97 Land Cruiser restoration. Installing new ABS all around. Rear has options for two different sensor kits for each side. Which yoke is correct? Don't see it mentioned in FSM.
04895-60020 YOKE L=52.6
04895-60030 YOKE L=53.1
I used to ask myself the same question 7 or so years ago when the vehicle was at 600 k km's and never could really resolve the issue in my head.
According to the people at Berrima Diesel, if the motor does not have any blow-by it's ok to turbo it, but I'm a little hesitant due to the high life...
Mom's 1999 was making a funny moaning noise yesterday, so I went and took a look. Definitely alternator side of the engine. With my stethoscope I couldn't hear it through the power steering pump, could kind of hear it through the tensioner, but I couldn't get the scope onto the alternator to...
Land Shark Outfitters Reef Drawer System & Sandbar for your outdoor adventures.
Sleeping/travel platform for 100 series Land Cruiser/LX470 Assembled.
All parts included.
Only used a couple times.
Couple years old
$725 cash.
Serious inquires only
Seattle WA, Madison Park
Easy pickup
I picked up the Sylvania Headlight Restoration Kit a few days ago after watching Project Farm’s video here
I applied the kit today in about an hour. Very easy to follow instructions and great results.
I have acquired the Eibach Stage 2 Lift Kit for my 2003 GX 470. Curious about how much of a lift is 2.2 in the rear? Is it from the factory low/medium/high on the airbags. Anyone install and have some measurements? Thanks in advance.
Chad
I’ve googled, I’ve searched, I promise… Someone recently posted a kit of sorts, available at the dealer, to re build or replace the turn signal switch on early-ish 40s, but I can’t seem to find it.
Am I dreaming, or is this a thing?
2003 LC, 193000 miles — Recently installed an Old Man Emu 2” lift kit, new method wheels and Mickey Thompson Baja Boss A/T’s 285/70/17. When stepping on the accelerating, basically to get into passing gear, the front end vibrates and the truck feels like it doesn’t want to kick in the necessary...
Selling a brand new early to 1972 deluxe carpet kit in black from JTOutfitters that I purchased for my 1969. Never opened. Never installed. I paid $429 + 35 shipping ($464 total). My price is 300 + 40 shipping ($340 total)...
Seeking a part time kit for a 1990 Hdj81. After a marks4wd set up that someone didn’t get around to installing. I believe pre-94 doesn’t require any modifications to run the Aisin hubs. Lemme know if you have a kit you’re willing to let go.
Located in Northern California(grass valley) but can...
This is a Transfer Case Rebuild Kit - Fits 3 Speed 1963-9/1973 4x/5x Series. Brand new. Bought 10+ years ago and has sat in garage. Koyo bearings.
$100 + shipping
Listing here for CSC first.
Asking $5000
Prefer local pickup at my house (SE Chandler) .
TRD Supercharger System suitable for
1998- 2002 Land Cruiser / LX470
2001 – 2002 Sequoia
2000 – 2002 Tundra
I purchased this kit used. I was told it was running when uninstalled and was used for 100k...
Weld-on panhard correction kit for 200-series. This will help reduce the bum wiggle/uneasy feeling/imbalanced suspension response out of your lifted 200.
$85 shipped.
I bout a new tundra last week and I have a couple questions. 1. Best leveling kit and why 2. What size tires can I run with that leaving kit on stock 18” Trd wheels?
Hello,
I'm looking for either a three-groove pulley to run a York 210 off the 1FZFE, or I can take an entire kit of someones hands. I'm hoping someone has one lying about they haven't installed, or no longer wants theirs etc.
I reached out to Joey and unfortunately the pulleys probably won't...
Besides pulling the third member?
I am considering a lokka install but you need a different kit for lsd. I don’t want to pull it apart then have to order the locker and wait.
Maybe if I pull the fill plug I can see enough to tell? That’s the only idea I have