injection pump

For sale is a 1-HDT diesel injection pump out of HDJ81. It was fully rebuild with a lot of brand new Denso parts in it so it's condition is nearly as brand new. The pump is $1299.99 USD (core deposit of $700 is required) Shipping is extra. Core deposit is returned upon receiving your old pump...

I'm having my HDJ81's leaky injection pump (IP) swapped out some time in March by Land Cruiser's Direct (thanks @SteveJackson !). I purchased a rebuilt IP from Cruiser Addiction recently to minimize our downtime when we have the work done. Anyway, during the removal process I'm wondering if...

I have a 1-HDT diesel injection pump and injectors set out of HDJ81. It was fully rebuild with a lot of brand new Denso parts in it so it's condition is nearly as brand new. Injectors come with brand new nozzles and they were all factory spec calibrated. PUMP is SOLD Injectors are SOLD Shipping...

Hello you guys, I have a leaking seal below Throttle Linkage on this injection pump pictured where my finger is pointed. The pump is on my 3B. If we pull the injection pump to replace the seal then is it hard to re-time the pump when we put it back in? Somebody mentioned a Key Way and that it...

This thread is not intended to replace the Official tuning thread but rather I would like some feedback on my understanding and procedure before I post in there. A little bit of background info. I have an 80 series 1HD-FT with the A442F Automatic transmission with 333,333 klms on the clock. I...

Hi all, I've got a UK 2000 Amazon, 4.2 1HD-FTE which, unfortunately, came with a knackered injection pump when it arrived to me overseas. Looking for somewhere in the UK that can help - mechanic has removed the pump and the car is now parked, I'm coming back to the UK for work in April so can...

Having a low power problem with my hdj100 auto. The car has done 420 000klm running fine but low on power. I'm thinking the pump needs rebuilding along with injectors. Could I find a low klms fuel pump instead?

I am swapping out a 2L-T for a 2L-T2. The 2L-T2 has additional "cannon" plugs for the Injection Pump that the 2L-T did not have. My question is if anyone knows, there is a blueish anodized electrical input at the top of the Injection Pump on the 2L-T2. Will the engine run without any electric...

Truck is a 1993 HDJ81 with an electronic A442F. Here's the breakdown: I had my injection pump rebuilt by a reputable shop and re&re'd by my normal guy (I just don't have the time to pull this otherwise I'd do it myself). Since the rebuild (which went well) my torque converter lockup, which is...

Truck is a 1993 HDJ81 with an electronic A442F. Here's the breakdown: I had my injection pump rebuilt by a reputable shop and re&re'd by my normal guy (I just don't have the time to pull this otherwise I'd do it myself). Since the rebuild (which went well) my torque converter lockup, which is...

hi,i am trying to remove the injection pump from a hdj81,everything is loose,have a puller on the front of the shaft,i have tried hammering on the puller shaft,the drive gear is not coming off. any body have experience this? i even tried heating the gear a little after i remove the o ring on the...

HI I need the lower left timer cover from a 1 HDT (or 1HZ too maybe?) injection pump. Anybody have a junk parts pump or a source for pump parts? Need to get the truck back on the road asap and my cover is cracked.

Guys, I got this spare 12HT injection pump from a local yard which parted out a whole engine. Though they stored the parts inside some dirt and gunk made its way to injection ports and the fuel feed pump opening which was removed already. Do you guys know how I can clean these areas easily...

I just purchased a '91 HDJ81 and it has roughly 275K Km on it. The injection pump seems to have a leak around where the distributive head meets the IP body (o-ring likely). I have the FSM - and I found a shop to rebuild it local to me (and reasonably priced). My question is: do you need...

Hi all, Im taking my pop-top HZJ78 on a pan-americas trip at the moment, got a bit of an issue i was hoping your expertise could help me with! When driving, for a while now, I get what feels like the clutch slipping, intermittently, especially towrds the end of longer drives. I thought this...

I got a 1987 BJ75 with the 3B motor, a continuous learning exercise. As it smoked a bit (black), I found advice that the "Full Stop Capsule" screw should be screwed further in to cut down on fuel. Here I noted that the pump adjusting lever did not even touch the stop screw. There was a spring...