fzj80

Hello everyone, first post here (go gentle) Ive got a 1fze 80 series in the uk, has an a442f gearbox with a 2-3 shift flare that i cant seem to rectify. Has had a new line pressure cable, new solenoid set, atf flush, and it still flares… I did unplug the gearbox ecu and drove it “manually”...

Forgot to seal/do anything to OEM roof rack bolt holes about 8 months ago after rack delete. Yes I know, probably one of the stupidest things anyone could do. ( I'm a high school student, please spare me the hate I know how stupid it was to forget about something so huge) Anyways, Id like to...

I think I have finally come to terms on letting her go. Mileage: 166,xxx Color: Cement Gray/Nardo Gray Interior: Grey Leather. California car. NO Rust Factory Lockers: Triple Locked - Everything works great and as it should. Birfs were serviced about 3000 miles back. Starts, Runs and drives...

Current state: I haven't had a Land Cruiser build in my life for a couple years and I've missed it. Just ditched my '20 Tacoma 6-speed. Fun to drive but at the end of the day, not a great platform. Test drove everything from PXLs and 200 series to LJs and 70 series. All have their strengths...

In my thrift store travels, I came across a never used Garmin Nuvi 3590LM GPS for $9 - it updated without any issues...like I said, it's "new". Came with the connecting base, traffic connector, everything that was NEW in 2017 for it, and, after spending almost three hours updating, it's...

Wanted to ask on the forms and see if anybody knew what this sound was. Whenever I am driving at approximately 60 miles an hour and let off and let it fall to around 30 I hear an odd grinding/vibrating sound. I just greased my Berfield joints, so I think I’m going to grease the rest of the...

5 80 series Landcruiser aluminum wheels in good condition. 16x8 with 4.5 backspacing and use the later style, shank lug nuts. Some wear on the surfaces from age but are all straight/true and very runnable as is. I rinsed these off a few minutes before taking these pictures and you can see the...

Hey all, The time has finally arrived where we sell our 1997 Lexus LX450. This truck has both front and rear e-lockers factory installed. The vehicle was purchased locally in 2010 making our family I believe the second owners. Overall, it's been well taken care of and maintained with an eye...

Hey y'all, this came with my 80 and I have zero use for it, so I'm selling. It's basically new! Asking $1250. ARB part no 4900010M + 3700050. Pick up only in the Austin area, will leave it on the Cruiser until you come get it. Can help you install if you want...

Just pulled the trans pan off my 80, replaced the fluid strainer and flushed the old fluid out through the cooler mounted near the radiator. Put the pan back on with oem silicone and used Valvoline ATF max life for the fresh fill up. BUT one thing I did not do was replace the shift solenoids...

Howdy guys, Does anyone know whether power steering pulleys from an FJ80 (44311-60060) and FJ62 (44311-60010) are interchangeable? Or were there changes to the power steering from a 60 series 3FE to the 80 series 3FE?

Just removed the fender flares and rear bumper from my FZJ80. If anyone is interested they are available. The fender flares are a little rough but in good condition considering the age of the vehicle, however, some of the mounting tabs may have broken during the removal process. The rear bumper...

For sale located in Richmond, VA. Asking $7950. Pros: Little to no rust Runs and drives and stops as it should New OEM spark plugs, fuel pump, and Denso alternator Seats are in very good shape for the age 4WD locks in great and works well 2 owner truck - Has been in Richmond since 1996 Clean...

This 80 series project started at the end of last year, and we suddenly decided to change the original color for the new light green or gray Lunar Rock from Toyota. I'm helping my cousin with this project, he doesn't know anything about cruisers but I decided to document what we have done so far...

I have for sale Marks Adaptor kit MFK1195AE6. Kit is brand new and adapts Chevy 4l60e transmission to 80-100 series hf2a transfer case. I was doing a ls swap and decided to change directions and go to 4l80 kit. I’m located in Tigard Oregon. Im willing to ship. $900 shipped to lower 48.

I have the parts pictured off a refresh of my exhaust system. These are still serviceable and hate to just bin them. Would ship them out for $100 and shipping costs. Thanks, Eric

$400 OBO I have a set of 3rd row from a 95 FZJ80, they're in perfect condition and are the gray leather color. Pics upon request as I have them in storage currently. Pickup or meetup within 50 miles.

Hi folks A few months back I got new tyres on my 1990 HZJ80R Landcruiser and wound up with 35" all terrains, as the shop said they couldn't source the 33" ones that I previously had. Yesterday a fellow Cruiser owner asked me if I was worried about the possible diff damage, as he had heard of...

I have searched for a similar thread. Haven’t found one so I am making my own. Getting ready to take my 80 on a road trip. I believe all of the baseline maintenance has been done by me. All Fluids have been changed and some flushed, hoses, belts, fan clutch, valve cover gasket, radiator is...

Selling a confirmed perfect-working 1993-1994 1FZ-FE ECU. Originally pulled from a running/driving 1994 parts truck with 114k miles. $120.00 OBO Happy to ship anywhere at buyers expense, otherwise pickup in Acworth (30101) or Smyrna (30080) GA. If you have any additional questions feel free...