ISSUE:
93 Cruiser LHD leans to the right and pulls left
SPECS:
2.5 OME Medium
Nitrocharger Sports
30mm front coil spacers
Yokohoma Geolanders 315 75 R16
DESCRIPTION:
Installed the coils about 4 years ago and to my observance it has always sat perfectly level. 4 months ago I installed new...
Let me start off by saying I never leave bad reviews but hopefully someone reads this before spending their hard earned money with this shady business... I ordered some Scheel Mann seats for my 80 back in August from Frank at land cruiser heaven. I have received little to no communication from...
1997 Lexus LX450 (non locked). 207,700 miles total. Approximately 10-12k since engine rebuild due to spun rod bearing. Rebuilt in March of 2018 i believe? And has warranty until March of this year. I've had it since January 2020. Since I bought it, I have had the knuckles rebuilt, serviced...
I have a rebuilt 3FE out of a '89 FJ80.
$3250.
It is complete top to bottom and front to back. New gaskets all around, rebuilt injectors, smog delete, PS pump, alternator, fan clutch and fan, starter, fuel rail and most electrical. bought this with 100K miles to freshen up and swap out my 300K...
SoCal, can ship.
All 3 pieces are in very good condition, no cracks, or issues at all.
The whole set is $116.84 including shipping, or local pickup $100.
OEM clamps pictured will be included.
AFM is spoken for. MANY OTHER ENGINE PARTS/SENSORS AVAILABLE
No noises, no knocks, no leaks. Engine Last Driven January 2, 2021
Compression:
#1 160
#2 150
#3 160
#4 150
#5 155
#6 160
This is just the engine without accessories or intake manifold, but does include oil pan, valve cover, front cover, pulleys, exhaust manifolds, flywheel, lifter cover and...
Hey guys, was hoping someone could chime in on confirming this issue. Just finished putting this motor in, it came from a wrecked donor vehicle. Started it for the first time today and this is what I hear
First thought I have is did the wreck cause rod knock? Motor ran great before, but it...
Hey Guys - I've been on the hunt for a lifer vehicle. My dad's had a '94 FJ80 since I was a kid, and I'm looking for one of my own.
This is going to be my 1-vehicle. So wiling to prioritize quality > over price. Tried with a couple eBay sellers that turned out to be rusty duds. So now turning...
Hey guys, my father has a 91 FJ80 US spec 80 series. I has the 3FE and A440F gearbox. When driving, the vehicle will revv up when shifting from. 2nd to 3rd. It seems like it “slips” for a second, and the revs come up, and then it “catches” 3rd gear and holds. Haven’t experienced any slipping any...
Hi guys,
I have a set of OEM LX 450 alloy wheels that were destined for a project truck that I sold a while back. I’ve always loved these, although that seems to put me in a minority ;)
They’re in great shape; just some light scratches, and a few small oxidized spots.
I’m in north San Diego...
All Parts as pictured:
95-97 Muffler and Flanged Pipe (aftermarket, FRESH) see picture $75- no shipping
93-94 Downpipes (Go from Exhaust Manfolds to front of twin cats) $125 for both, $65 each, ready to weld to cats.
93-94 Y pipe, goes from rear of twin cats over the frame. This connects to...
Imported from Japan into Canada last November registered in British Columbia now registration that has expired and we are moving out of the country must sell possible great donor vehicle por owner. runs fabulous 120000 MI, refrigerator freezer center console, because we drove over the Border...
OME 2860 coil springs
I used these in the rear of my 1996 land cruiser for around 8 months and 2500 miles
They give roughly 2.5 inches of lift
I swapped these spring for 2864 because of a heavy aftermarket bumper and pulling a trailer
I think they will also work in a 100 series?
No shipping...
1993 Toyota Land Cruiser for sale. This is an unmolested, completely stock truck with all the upgrades you could get for the year. This truck has been owned in California and has been garaged since new. The white paint and clear coat are in very good condition, it is rust free and is very...
Hello all,
I have looked and was not able to find any info, but I recently received a rebuilt 3fe engine for my 91 fj80. I have noticed that the block that I have does not have the mounting holes for the trans to engine stiffeners. Is this something that needs to installed so that i can try and...
91 fj80 3FE motor comming out. Ive got access to the motor mounts, when i remove the bolts from the trans bracket everything ( motor, transmission, transfer case, drive shafts) moves. So its time to hoooker up and need to know if is easier to remove intake or if i can do it like this( pics)
Hey guys, I have a 91 fj80, and I want to make it into something for occasional fire roads and sleeping inside the vehicle. I've already got 31" K02's. What should I do next? Comms? Rear bar to gain some departure angle? Front bar? Other than the tires the rig is stock. Any ideas would be real...
This is a one of a kind land cruiser. Averages 22mpg. 401,000 miles and increasing. Many items have been rebuilt by a professional shop. Original swap done by profits. No major leaks. Not in a rush to sell, just putting it out there.
$27,500
1994 Toyota Land Cruiser
Recently rebuilt front...