1. G

    Tick noise after BEB change

    So I changed my big end bearings last weekend and need some advice. I Replaced the original OEM bearings (marked with "4", BEB Pictures Here) with standard size taiho. The old bearings looked ok and all of the rod journals looked good. I plastigauged only cylinder #4 and it was right in...
  2. N

    Where to get 1HD-T big end bearings (Duraglide, Taiho?) and smokey diesel Q

    I'm a new owner of a 1991 HDJ81 and am looking to sort through the truck before putting it on the road. I went to order some ACL Duraglide big end bearings after hearing about this as a preventative maintenance item (truck has 135,000km and probably has never had them replaced). I ordered some...
  3. Mighty690

    Another 1HD-T BEB job

    Just under 237,000km (147,000mi) on this recent JDM import. I wanted to do the BEBs and see how things look in there. I was pleased. And the job went well.
  4. Echelon

    BEB and oil pressure

    I just replaced the BEB's on my 1hdt with 160k klm. There were several with small pitting. #2 top was the worst. My oil gauge had been reading low since I got it but I figured it was just a faulty sender. Fired it up and found my oil pressure had improved. Before my reading at idle was almost...
  5. meatman

    new member

    Hello all, My name is Max I just joined in because i finally got my LC. I bought a 1993 HDJ81 a couple weeks ago. factory winch, rear and front ( and center) diff lock. no mods for now. I'll get some picture soon. it has 350 000Km. Im the second owner since its been imported in canada. The...
Top Bottom