72

Hi all, I have a 72' (Dec 71 build) that currently has the split bench in it. At one point I pulled the bench seat setup and put in a set of Corbeau seats, but I never liked the look or that the passenger seat was much higher than the drivers side. Last weekend I pulled that setup and went back...

Looking for a mounting bracket for the clutch slave cylinder in my 72' 40. I'd attach a photo of one but I'm missing it - hence the ad. :)

In the midst of reassembling my 72' after paint and spent the day putting front fenders, bib, grill, hood, etc. on. Running into some trouble with some of the hardware fitting on the hood. 1. The hold spacing for the windshield rests don't seem right. The spacing on these holes is 2 1/8"...

I am look8ng for recomendations for a locker for the rear diff. Thanks!

Looking for a useable main wire harness for a 72 fj40 if anyone has one they would sell? Anybody know of any other year wire harness that could be used in a 72? Thank you

My 72 fj40 will not start. It did start when taken out of winter storage. Actually problem started last fall before storage. Although when started did not run on all cylinders. Would run fine after revving engine. And would start fine while starting and stopping on trip. Next couple of times...

tree won and broke the base of my marker light. looking for a used one as a shiny new one would look out of place

Looking for a set of fuel tank straps that'll fit my 40. Anyone have any or can point me in the right direction where I can find a set?

Chevy 305 with 20,000 miles on it but needs carburetor, 3 speed transmission, front left clip and Fender cut out, all four doors and glass included, suspension lift and rebuilt axles.

I have a few remaining small parts left off a 1972 FJ40 You can see what's left here in this photo bucket PM me for pricing or with questions or email me at SigfridsAndSons@gmail.com Items include: Front heater Wiring harness Wipe Wash switch Horns Relays "Fan Rear" Switch "Fan Front" Switch...

Looking for a front seat for my 72. Have one but needs a complete rebuild. Looking for one that's ready to bolt in.

For sale Frame in good shape with surface rust only. Outriggers and body mounts are all solid. PRICE DROP $400 $350 Located in Buffalo, NY.

Just opened lol the air cond./heater,...hope it works well . Some of you will know probably some pros and cons, but its better than I've had...windows down or up lol. Been working on bumper. Something to protect the Oldie 8000 lb Warn winch from the oncoming deer in our area. Other rigs been...

72 and a 77 FJ Both rolling chassis with bodies and axles. 72 does not have any other drivetrain. The 76 has a disc front, 2f, 4 speed trans and case with a pretty good tub. I have both front fenders and can put a decent one piece hood on it if wanted but otherwise what you see is what you...

Up for sale is a good solid set of hood hinges from a 72 FJ40. $30 shipped I wire wheeled them some but the could use a good blasting and paint of your choice.

hi tanks in advance for help and ideas. I am gonna build a exhaust system for my fj40 and I have never done one before. The headers I have on the 5.3 liter vortec are 2.5 inch flanges. Should I go dual exhaust or 2 into 1? If I go 2 into 1 should I upsize pipe ? If so how large should I go...

Going through my 72 FJ40 to get it ready for its first run and have a brake issue. It has the stock drums on all four, replaced all of the wheel cylinders and pads and turned the drums. After a couple days bleeding the system with my boy no dice. Pedal would go to floor each time on the first...

Windshield from a factory soft top 72 Has aftermarket snaps for soft top Glass, frame and rubber is in great shape except for surface pitting beneath hinge mount areas. Includes wiring harness for wiper motor. Hinges also available. $200 plus ship from Buffalo, NY

I can't seem to find whether this will work or not. I would assume the only issue would be with seat brackets but I don't have an interior for my cruiser yet. Maybe the filler neck connection? Both tanks came with the purchase. Mine is a 1976 and the tank on the right is oem but rusted out on...

i have a pretty rough 72 FJ40 instrument cluster. The gauges look to be toast but the housing looks good. I figured somebody could use it. $25 plus the ride.