2uzfe

I posted this on the GX470 board but they suggested I also post it here because of the deeper knowledge base of the 2uzfe motor... Okay, so my mechanic friend was helping me with my 2006 GX470 (190k mi). We agreed that he would do the CV axles and that was fine. I needed the water pump (leaking...

Okay, so my mechanic friend was helping me with my 2006 GX470 (190k mi). We agreed that he would do the CV axles and that was fine. I needed the water pump (leaking a lot) and timing belt (way past due) changed. He suggested that we tear it down to the head gasket and get the heads cleaned up. I...

Joined forum after searching for information on 2UZFE engine. Read post from 2001LC (if I remember correctly) and directed me to mud. So I bought an 08 4Runner with a known bad 2uz vvti. Previous owner states his mechanic says bent valves. Truck does start but stalls after 15-20 sec. Sounds...

Recently my dash lit up like a Las Vegas sign. No specific code. Later that afternoon the codes disappeared. Two days later the codes came back and I caught it with a P0305. Well that's fixable. I had a new set of Denso Iridium spark plugs and Denso Coils already in stock. So I change...

Hi I’m new to the group, I own a 2005 4th gen 4runner limited with the 2uzfe. I’ve owned the car going in 6 years with no issues other than an intermittent P0430 which usually went away so I ignored it. 5 months ago I replaced all the spark plugs with oem from the dealer in an attempt to improve...

Hi All, I have a 2003 LX470 that - like many of us - I've personalized quite a bit. Brand new 33" tires, brakes, rotors, bearings, custom bamboo tailgate cover / drawer system, lithium ion battery system, front and rear lockers, 4.30 gearing (5spd normally 4.11), completely rebuilt front and...

Watch at 14:14 time mark. This guy knows what he is doing.

Solid truck, titanium metallic paint with navy interior, originally from Florida, lots of upgrades (please see below), no rust, daily driver. Please reach out for more photos. Thanks for looking. $22.6k. Thorley Long Tube Headers, cross over pipe, and 3-chamber Flow Master 50 series muffler...

Lexus lx470, 2uzfe, running. old man emu lift kit (heavy duty) New alternator

Build Thread: Builds - BoltRipper's 2-year Overdue Build Thread VIN: JT3HJ85J1V0188362 This a turn-key 2 owner, impeccably maintained 1997 (12/1997) 80 Series Land Cruiser Collectors Edition with professionally installed 2UZFE 4.7L V8 mated to the Toyota A343 4 speed transmission. Truck has...

Hey guys, got a 1998 lc and I'm looking to install a super charger. I know they're rare but just thought I'd post to see what's out there. PM me if you've got something or know someone. Thanks -James

Posting for a friend (jamesjr4750 on TundraSolutions forum). Long story short, I bought a kit from him a few years ago for my 100-series but never installed it - found James to be a super helpful, responsive and honest person to deal with)...

Looking for a 2UZ-FE Motor for a 2004 Lexus LX 470/Land Cruiser (preferably with low mileage).

Hey guys, Anyone have a wiring diagram laying around from a 2UZ-FE swap? I'm trying to figure out how to go about stripping my harness of all the unnecessary wires. Thanks! Kyle

Looking to sell my LX 470. Recently overheated, engine is done. It has almost 420,000km on it. I am really trying to avoid sending it to the scrapyard, it would be a waste. I don't want to part it out, you purchase the entire LX. Price is $4500. The good stuff: Body and interior are in...

Thought I would post this up here for a little more exposure. I'm parting out my 99 locked 100 and am offering the complete drivetrain in case anyone is interested. It was running just fine before I was ran into at an intersection. Asking $2500 or best offer. I can place on a pallet and drop off...

A GX 470 has become available. The exterior is mostly destroyed, but the motor and tranny work fine so I'm going to swap them into my 1993 FZJ80. I've found other 2UZFE swaps, but none from a GX470. Is there a reason for this? What do I need to know going into this? How does the geometry...

A GX 470 has become available. The exterior is mostly destroyed, but the motor and tranny work fine so I'm going to swap them into my 1993 FZJ80. I've found other 2UZFE swaps, but none from a GX470. Is there a reason for this? What do I need to know going into this? How does the geometry...

I bought this unit in early 2016 for my 2000 Land Cruiser, refurbished completely and thoroughly including new MP90 unit. Since then it has been sitting in it's packaging, waiting to be installed. But after much deliberation, I decided not to go through with the install. Will part with it for...

Hey Guys, I have a 1999 Landcruiser with 250k miles. Pulled the motor myself, and is currently at a machine shop being rebuilt. (Engine blew from being overheated due to a failed coolant T in the desert). 2 questions: 1) Any non-obvious recommendations about replacing parts while I have it...