100-series

Hi All, Cross-post from the 100-series subforum. As the title implies, I have $20-$25k to spend on an 80-series or 100-series. I'm combing the classifieds daily, but thought it couldn't hurt to post a WTB here. Since "best" means different things to different people, these would be my...

I have (3) 18-in factory Toyota wheels with center caps for a 100-series Land Cruiser. One wheel is near perfect while the others have a scratch or 2 on the face. Willing to sell individually for $50 each or $125 for all 3. I also have (1) 16” wheel with a Michelin LTX M/S P275/70/R16 tire...

San Diego, 100-series Tan/Beige sun visor assembly, passenger side. 1998-2002 $85 plus shipping

This master cylinder was removed and replaced as preventative maintenance. It functioned just fine when removed. It has 225k miles on it. Price: $400 includes shipping to continental U.S.

I've decided to get a 100-series in addition to the '22 GX in CO and have owned my share of LC's and 4Runners etc. Pricewise, hoping you guys can help me get a feel for what I'm looking at. It's a 2003 with 120K miles and has had timing belt and water pump done. Appears to be in exceptional...

Looking for any of the fit stuff for a 100 series / LX470 RCH6 RCP02-BK QMVA05 Bonus if anyone has the pioneer wrap pads Thanks! I'm in NJ

Mounted mine too low on my swingout and boogered it up on Hell's Revenge. :)

I bought a used transfer case from CruiserParts with plans to do an ultra low range swap. My plans have changed and I am no longer going to go this route. Does not include with sensors or CDL motor. One of the studs on the rear output is spinning which would need to be addressed before...

Selling a set of nearly new Trail Tailor Recovery Points with four bolts for mounting on a 100-series. One recovery point is radiused for soft shackles, one is plain for bow shackles. Bolts are grade 10.9 flange heads with a higher torque rating than standard hex heads. Bolts were coated with...

Like the title, trying to figure out whether or not to get a ScanGauge II or the new ScanGauge 3. The II looks like it would fit better with the overall theme of the 100. Not interested in running gauges from a smart phone...

I am very new to the platform and after having looked at a few for sale and being disappointed by the overwhelming amount of paint work I'm finding. I've been involved in the Porsche Audi scene for 25 years and in most cases we deduct a minimum of 20% of it's declared value if there's evidence...

Hello, Selling my Grom VL2 for the 2004, 2005, 2006, and 2007 LC and LX470, p/n LEX4VL2. It is unopened and new in the box. $500 shipped in the lower 48 w/ PayPal friends and family. Retail price is $679.95...

Recently purchased an 07 and am doing some baselining on it but am leaving for a trip this weekend and the heater t stories have me a little nervous. The truck has 125k on it and at 100k the PO did the timing belt service as well as a bunch of other things (radiator hoses, thermostat, water...

I've been a very happy Hundy owner for the past 10 yrs. My rig is an '03 with 210k miles on it that I picked up in 2013 with 88k miles. It's been fantastic to own. I started searching for the face lifted 2016+ 200 a couple of years ago, but it was hard to swallow $70k + for a used rig that in...

Just fitting lokkers front and rear the diff carrier bolts are recommended 90ft lb ive tightened to 30 then 60 and as I'm getting to 90 the air actuator bracket spun on the bolt and twisted out of shape stumped what to do with it now anyone seen this before