Recent content by TLCPNW

Updating this thread as I recently used it to find a location to pass some wires (Ecoflow alternator charger) through the firewall. I used the same location as savirc (OP) did, but I accidentally put a tiny hole into the return mixing box (referenced in the previous post) using what seems to be...

I'm hoping this helps someone: Denso 950-0107 Rock Auto Close-Out Double check model number for your model year of course. Fingers crossed.

First thought: did you top off the transmission fluid since you lost some that was inside your old radiator? Check your fluid level first (follow the directions in the owners manual.. Essentially bring it up to operating temperature (150-175ish) and check the level while it's running and in park...

My first thought is that you didn't fully burp the system of air. I'd start there (do you have a radiator funnel unit with the stopper?). Search around for directions... But essentially hook the special funnel up and then get your vehicle up to temp, and then get to 3000+ rpm over and over...

Do you have the tire you're going with picked out yet? I'd do the AT4s in 255/85/16 if they were E rated.

Excellent info from a trusted guru. Thanks Malleus, always appreciate your insight. For the settled voltage, I see what you're saying; I've just noticed how the voltages react on a day to day basis on my gauges (one being Torque Pro) based on my average day to day driving (checking the next...

What are your voltages (when you start, and what it settles to) pre and post install of this unit? For me (I purchased the GM diode somewhere else) my pre values were: ~14.1 when starting and settled ~13.4. Post values: ~14.5 and settled ~13.8 Just wanted to throw some data points out there...

I'm guessing this is the thread you're referring to: The ABCs of AHC - How to Measure, Flush, and Adjust all in one place | IH8MUD.com Forum | Toyota, Lexus & Off-Road Community Discussions The ABCs of AHC - How to Measure, Flush, and Adjust all in one place - https://share.google/Ow8RxkIgVgXwiBKB6

Love your tire valve caps. Great product.

That does look like the first generation Dissent rear bumper that needed the rear crossmember cut when installing (current version doesn't require this).

Is there a DVD screen unit installed? That's a known culprit. I believe there's a few threads on the subject that a quick Google search would find. I always search the keyword/phrase and then "ih8mud" which works way better than the search here.

Looks like the River Rock Mica color vs Burgandy (which is reddish). Beautiful rig!

You need to lock your center differential when you take off a driveshaft.

Welcome! Doesn't look like the pictures are working. I can't open them.

2000 here. Probably a 3/10 when cold (Portland cold) and 6/10 when warm. I've sprayed the channels with dry lube and it kinda helps, but the cold really slows it down. I'd buy one if you made a version for my year.