Recent content by shocktower

I have been running the prototype for 2 years and not 1 issue with it,and my 80 is my only vehicle so I drive it everyday,and some of my windows runner's are original and to honest I don't see a huge difference in speed

I am grateful that I have 2 spare A343F transmissions so I don't have to rebuild 1

So I'm going to chime in for the ones who doubted this,I have been running the prototype for 2 years and not one problem,with the Window Rocket and my Land Cruiser is my only vehicle that I drive daily its such an improvement,I still have 2 windows with OEM runners, I was the gueneapig but I...

Thank you I believe the spring has went bad I'll look tomorrow at it

Oh its out of the vehicle and I see the detent but feels soft

Apples and Avocados Well I guess if you want to compare things an aftermarket bumper usually has the correct hardware I'd use that you'd think someone made thicker flanges should have the appropriate hardware I still dont understand the thicker flanges when the stock ones do fine with many...

So my transfer case will shift fine but will not stay in HI or Lo ,I took out the spring and detent ball and its all there,I feel the slight tension but will not stay in gear, is there more than one detent i used my fsm to see am I missing something

And now he's doing a big EfU with Otra Vez which in spanish its would you like another or once again and using his kid's name for his new ponzi

This doesn't replace the whole system like he asked I would pull the fender that's the easiest way in my opinion

Your hopper is disconnected, it is the little box in the right rear it probably has your trailer wires in it too

Why does it say when purchasing with mud flaps or without, I bought mine so I could specifically use the stock ones but after building it I noticed there's no way and I'm a little disappointed, I bought my kit a long time ago but it sat in the shop for ever and now I'm kinda pissed and have to...

OK I have a functional AC and everything what you told me didn't solve my problem, but I did a little poking around and found out the Tem shut off switch was the problem so when I unplugged it my clutch engaged and I've got cold air I know it's been a while since I asked but I figured it out 😁😁😁😁

I agree I bought some 3M specifically for this application out have to buy a special applicator gor them

I remember that it was so fun

I deal with more than my own Land Cruiser 80 series and I thought it was the, rubber stoppers, and after looking at several other ones I went and replaced them on mine and a customer's and it's 💯 the separation of the skeleton and skin , I'd never use spray foam it's going to push bumps in your...