Recent content by PharmerDan100

  1. PharmerDan100

    Dobinsons 100 Series Suspension options - full breakdown

    This chain wrench from harbor freight worked great for me. Just sharing as an option for others if they want to save their old shocks.
  2. PharmerDan100

    Window Vent Shades / Visors

    I installed my wellvisors with the clips and double sided tape provided and theyre holding up great. no interference with auto window up.
  3. PharmerDan100

    Easy Ditch Light Install and Firewall Passthrough

    Yes, the driver side rubber boot hole is plenty wide for more cables, just not sure the best route all the way to the rear.
  4. PharmerDan100

    Easy Ditch Light Install and Firewall Passthrough

    First feed the cable from inside the hood through this gap: Open the door, and you should see the loose cable dangling in this small gap. Use a wire clothes hanger to hook it out: Then feed it up this way to plug into your pod light: Hope this helps
  5. PharmerDan100

    brake bleed question

    made a vid following @2001LC 's procedure, in case having a visual helps others.
  6. PharmerDan100

    Complet Front Brake Service

    For OEM, the FSM diagram is a bit unclear. Where exactly do you guys grease the pads/shims? Are the arrows indicating just specific points exactly where the arrow tips point, or spread along the entire surface of the sides they are pointing to? A) Like the FSM: B) Like the TCMC YouTube...
  7. PharmerDan100

    Spindle Bearing Grease

    Can someone help me understand the anatomy of the spindle bearing and proper greasing procedure? Planning to replace my brake rotors, calipers, pads, etc., repack wheel bearings, and grease the spindle bearings while I'm in there. Just struggling to understand exactly how its done. Watched this...
  8. PharmerDan100

    ARB UCA Release

    are you sure this fits the UCA0010? I had called ARB and they said they only sold the entire ball joint with the boot for that particular UCA. The other boot kits they have available for sale were meant specifically for other UCAs. At least that was my understanding.
  9. PharmerDan100

    ARB UCA Release

    2 years on mine and happy with them, but a little annoyed they don't sell a boot kit specific for the UCA0010. My left ball joint boot developed a small tear and my only options were to patch the tear, or replace the ball joint entirely ($70)..
  10. PharmerDan100

    brake bleed question

    I'm planning to replace my front calipers, pads, rotors and swap in Slee stainless steel lines. Is it best practice to do this full flush before installing the new brake components?
  11. PharmerDan100

    Dobinsons 100 Series Suspension options - full breakdown

    Not the best pics, but they're the only ones I have on my phone right now:
  12. PharmerDan100

    How To: Replace your own steering rack

    I put together a write up using @Ayune's as a template, added photos from this thread, and tweaked some steps and torque values from the '98 FSM. Feel free to use at your own discretion. I'm not a pro like some of the veterans on here, but I recently finished this job using these steps. Please...
  13. PharmerDan100

    How To: Replace your own steering rack

    Agree 100%. Makes the job so much smoother also. Heres some others I compiled before tackling the job. The dust shield makes it tricky, but these pullers are small enough that they can (or should) fit. I know these work: AutoZone 57022 loaner (what I used) OTC 6296 puller (what I saw work on...
  14. PharmerDan100

    Heater Hose/Tee Replacment

    Has anyone tried or have thoughts on these steel heater Ts? I've only been able to find discussion between plastic vs brass, but nothing on steel. https://cruiserteq.com/heater-tee-steel-fits-1998-2007-100-series-lx470-applications-egwh60460st/
Back
Top Bottom