Recent content by GerLC100

In case it's coming from the tires it should change with different tire pressure. Quick and easy shot. Did you try that? just reduce by 1/3 and/ or increase by 10-20% and see what happens. Sounds changes --> tires sounds doesn't change --> not the tires

Always sad to see a Land Cruiser leaving. Always glad to see how this tank protects people! Glad your wife is ok!

Not sure about his Land Cruiser experience, but can generally highly recommend Yarnell's in Mountain View. He only doing Toyota, Lexus, Acura, ... after warranty. Very calm and cool guy, doesn't repair what's not needed (once "denied" to swap in a new wheel bearing when the other side was bad)...

An Explorer breaking with 4400lbs seems odd. Likely maintenance related and not really an apples to apples comparison. Same is eventually valid with another 25 year old car. search for "towing" and you'll find 100 thread about it. Here's one example. Overall summary: if nothing is bad with the...

I'd say mainly suspension parts: bushings, ball joints, .... Also heater T's, brake master. There are also some threads here for maintenance topics. Look for baseline, baselining, ... things like that and you find a lot of lists on things to surely do, to can do and the most fun to want to do :-)

Here you go. Can measure the size of the box tonight

I have Dobinson's upper that are pre angled to fit 2.5" lifts. Wheel alignment worked nicely when you have the correct ride height.

Crutchfield is likely the place to go for parts

I did it very similar to this, but just bought an electric box at Home Depot. Same Place, same idea. Main point for me when printing: thinking about holes to fix it in place in that place. I just wrapped some cushion around it and left in that place.

those pictures make me sooo jealous!

Wow! Welcome here and have fun learning about it!

Sensor picks up the signal from the rotor right? Is it clean inside there?!

Bookmarked! Thank you!

I keep my 7 pin connectors zip tied on the hitch and am able to remove it when I need it. Another idea for me would be to route it from under the rear quarter to behind the tail light and from there into the compartment of the tools/ car jack. This is how I routed my cable for the ecoflow...

Nice! Does it just look like very close to the trunk or is it that close? Some swinging back and forth... ?!? Edit: and also taking it on/off the carrier...