Recent content by BiotechBoy

Did these headers need a gasket?

oh i see that thread now...wow what a write up. thanks so much and will now start reading it

Did you get these installed? and if so, how did everything go?

i need to find the link to a thread that i added to with this very problem. i ended up having to cut the bolts because they were so rusted. i can look later when i have more time to find it but try searching my name.

here's a newer link for similar product https://www.amazon.com/Flexible-Cleaning-Dredging-Suitable-Feeding/dp/B0CVVYS66F/?tag=ihco-20

it's kind of hard to see all the part numbers from this picture. any chance you have them and could list them here? thanks

There are no new heat shields with the new headers and you don't reuse the old ones?

Instead of the volvo part number for the green Fuel Tube Connector Clip, the Toyota part number is: 90923-07002.

i think the Blue wire powers the remote actuator for the locks that is part of the manual key cylinder in the lower tailgate. I know this because mine wasnt working and I traced it to the broken Blue wire. and when i reconnected, the key would again trigger the lock actuators on all doors.

Definitely keep us posted on how it went if Successful. And can you also share a link to the exact unit you bought from them? thanks

The gas cap? what does the gas cap have to do with the ABS and VSC? Has that worked for anyone? I would never have thought of that, but i'm getting desperate.

I've been having the exact same problem for over a year with the same codes. I'm going to try a replacement ECU from eBay for $100 before i go to the dealer. But has the new ECU solved the lights problem for you? almost 18 months later now?

Thanks for all the incredibly helpful videos, Tim. Have been invaluable for me trying to get my 2002 LC back into driving shape. I'm original owner and never put much into it. And almost had to get rid of it from all the rust in Vermont winters. But with only 130k on it, your videos...

Ha. Yes 23 years in Vermont winters will do that. I took these pics before I replaced the swaybar bushings bracket with a new OEM one from Toyota. But for the rest of the rig, I had never heard of a needle gun until you mentioned it. Now that I looked it up, looks like a real cool toy. I'm...

I had never heard of an "induction heater" until I just read your post. And I have plenty of rusted bolts that need to come off that are too close to other important stuff to reliably use a torch. Has anyone reliably used one of these for $170? This one is 1100 watts but there are ones at...