Body Mount's

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

N

NorCalBorn

10 Year 15 Year
Joined
Aug 31, 2008
Threads
102
Messages
1,856
Mine took a dump and are pretty much disintegrated. The Old part #'s for reference: 52203-35170 (#2 Cab Mounts) and 52205-35070 (#3 Cab Mounts). I already ordered mine today through Toyota but I am literally getting the last set available nationally and know it's time we have alternate part #'s available to us.


I tried looking up Poly's and DayStar's but got nothing.
 
I know, problem is they're the generalized stuff from Poly. They don't cover 2nd Gen 4Runners, just 1st Gens, Trucks, Tacomas, and T100's.

What I need are the can or flanged style one's for the 2nd Gens.
Roger's picture here shows what I mean, #'s 1,2,3 are specific while 4-5 are where you can use the Poly style. (Although a B/W photo you can see the lighter red ones on the right.)
Body_Mount03.jpg
 
*Funny, huh, I get little rust issues, but we go through rubber seals/etc out here the same way they do in New Mexico and Arizona. The dry heat just destroys and/or dry-rots stuff away.

1st shot is of the one mount still mostly intact, the second one shows how them failing and shifting was causing the clunk as the lower washer plate smacked the chassis mount.
IMG_0001.webp
IMG_0004.webp
 
Last edited:
*Already noted...I already plan on calling Roger mid-week just in case I find out the national #'s are off. I'll call Poly directly since they're closer (SLO) than LCE and I get good $-ing. LCE is a good option, although it looks like a generalized Poly, Energy, or Daystar kit and you can't get a good enough pic to see them for sure. **FWIW**The plates are reusable if not destroyed and I have in the past pushed the black aftermarket bushing's into them but they really don't compare with the factory stuff as far as direct and reliable fit. I want to see a kit like they had up through 2001 which is like the B/W pictured one Roger has available.

EDIT, the kit above in WDA's link is in fact an Energy kit, part #ES818103, the "E" depicting "Energy".
 
Last edited:
Lookee what I just findeds! Whiteline's making Idler Arm bushings for rebuilds! On this page: http://www.energysuspensionparts.com/products.asp?cat=Toyota+4Runner+4WD+1995
W11693 Front Idler Arm Bushings

Energy make's the kit as a common part #818103 and here's a bigger shot of it: http://www.energysuspensionparts.com/proddetail.asp?prod=8.18103
(**I'm not sure if they still make the 818103-B so you can get them in black like factory or not. I'll call 'em monday.)

Also found this: https://forum.ih8mud.com/79-95-toyota-truck-tech/589901-ifs-stopper-mounts.html#post7614137

Productive weekend I must say!
 
You better get your part in a hurry or else will be working on the street,I just took in some extra work for the coming weekend you just might get bump.LOL
 
While we're on this topic, I have a complete set of poly cab bushings, they are Energy Suspension #8.4101. I installed them 8 or 9 years ago, and they were kinda crusty when I pulled my cab off last summer, so I bought a new set. They are still usable, just not pretty, they would definitely be an upgrade if you still have your 25+ year old rubber bushings. Free for the cost of shipping.

I'm out of town right now, I'll get a picture when I get back home later this week.
 
KLF said:
While we're on this topic, I have a complete set of poly cab bushings, they are Energy Suspension #8.4101. I installed them 8 or 9 years ago, and they were kinda crusty when I pulled my cab off last summer, so I bought a new set. They are still usable, just not pretty, they would definitely be an upgrade if you still have your 25+ year old rubber bushings. Free for the cost of shipping.

I'm out of town right now, I'll get a picture when I get back home later this week.
Click to expand...

Done send me your paypal addy
 
You must log in or register to reply here.

Share this page

Back
Top Bottom