I replaced the brake calipers in the front on a 76FJ40 and now have very little brake fluid going to the front brakes. It has rear drums that have lots of pressure, I bleed brakes on all corners. I believe the proportioning valve is preventing fluid from going to the front and have not been able to reset it.
I've started the 40 and pumped the brakes and do not have enough pressure to drive the pistons on the front calipers.
Any recommendation on how to reset the proportioning valve or do I need to buy a new one from City Racer?
I've started the 40 and pumped the brakes and do not have enough pressure to drive the pistons on the front calipers.
Any recommendation on how to reset the proportioning valve or do I need to buy a new one from City Racer?